To me, the greatest thing about lifting weights is the never ending ways to challenge yourself.

Just when you accomplish one goal, there’s any number of other things you can do to make yourself better.

In the Fall of 2014, I pushed myself to the limit with 20-Rep Squats.

I wanted to see how far I could go.

I started with 225-lbs, and over the course of about 10 weeks, I worked my way to 355-lbs. I only got 16 reps with that, however, as on my last rep I strained a hamstring/groin muscle.

But I had no regrets. Sometimes an injury happens when you’re trying to see what you limits truly are.

After a couple months of rehab, recovery, and rebuilding, I decided I was ready for another round of 20-Rep Squats, only this time i was gonna do it a little different.

Instead, this time, the goal would be to hit 20-reps of Goblet Squats with the Inch Dumbbell.

Here’s my best effort to date in max reps: 13 with the 176-lb Inch Dumbbell on loan from John Eaton:

Goblet Squats are a great exercise. While they are usually used as a precursor to Back Squatting by using lighter weights, they can also be used for heavy training as well. On top of using the Inch Dumbbell for Goblet Squats, I was also using the 200-lb Kettlebell for Goblet Squats for a time this year as well. You can see some videos of that here => 200-lb Kettlebell Goblet Squats.

What’s interesting about Heavy Goblet Squatting, especially with a circus-style dumbbell such as the Inch Dumbbell, is that a part of the bell lies on your stomach.

So, not only is breathing difficult due to the dumbbell being held at chest height, you’ve also got the additional challenge of breathing through the belly against the lower portion of the dumbbell at the same time.

I liken this challenge to performing multiple repetitions of Atlas Stone lifting. The difference is, you never drop the stone to re-grip or load it atop a platform. Instead, it’s like you just keep going from the lap to the chest-load position.

Stone Lifting Technique: The Chest-Load

Above, Steve Slater lifts a stone to the chest-load position. Going from lap to chest-load like this feels VERY similar to Inch Dumbbell Goblet Squats.

It makes for an awesome physical challenge, and that’s what it’s all about, for me, when it comes to strength training.

I’ll keep you updated on the 20-Rep Inch Dumbbell Goblet Squat Saga.

Speaking of the Inch Dumbbell, next week, I will be shooting a DVD on that very subject. If you’re training to lift the Inch Dumbbell, make sure you sign up for updates about it using the form below.

Lift the Inch Dumbbell – Sign up Below:

All the best in your training.

Jedd

Are You Training to Lift the Inch Dumbbell? This DVD Will Help You:

Today I have an awesome guest post from Steve Slater. Steve and I teamed up on the Intro to Strongman Training DVD and he recently put together an article on how he approaches Stone Lifting when he works with new guys in the sport. I just did a Strongman Workshop with Steve two weekends ago and he is loaded with knowledge on Strongman. Look for more articles and videos from Steve down the line. Enjoy!

Atlas Stone Training for Beginner Strongman Competitors

Atlas Stones are a fundamental test of strength in many strongman competitions, and they have also become a staple among strength training enthusiasts who are looking for the ultimate strength workout.

Stones literally tax everything from head to toe. In fact, try not contracting any major muscle group like your legs, glutes, back, chest or biceps during a stone lift, and let’s see if the stone even comes off the ground – fat chance.

When it comes to Atlas Stone training, you’ve just got to know how to do it right! So let’s get into that right now.

LEARNING THE STONES

It’s time to get your hands on some stones and get to work.

At first, it can be easy to get frustrated with atlas stones as they fight you the whole way up. Since they are round, they make your job of lifting them very difficult, and once they start to get loose on you, they often win the battle.

Learning how to conquer the atlas stones takes time and requires understanding the proper technique. Once you master the technique you then can really start to work on using the stones to take you to a new level of fitness.

SAFETY FIRST

Stone lifting is generally done by pulling the stone from the ground and either placing it on top of a platform or barrel, or it is put over a bar of a designated height (usually 4 feet or higher). Whatever you choose to lift the stone onto or over, make sure that it is stable. Here are some examples of loading strategies we have used.

Normally, we lift the stone over an adjustable strongman yoke bar. We also at times use solid platforms to load several stones one after the other. To make the platforms, we fastened wood pallets on top of each other, and attached plywood to the front and around all sides. We sometimes use whiskey barrels or oil drums, but if you use a barrel watch out for the lip, as it can be a finger pincher.

With all platforms, please use caution making sure the back side of the platform is braced; this will keep the platform stable so it will not tip if the stone hits it. Once you’re more experienced you can work on shouldering the lighter stones. Incidentally, the world record for a shouldered stone is held by Derek Poundstone. In 2009 he shouldered a massive stone in the range of 420 lbs.

If you practice stone shouldering, make sure you use plenty of rubber mats to drop the stones on. At our club we use four of the 5/8” thick stall mats with plywood under them so we can just drop the stones off of our shoulder or the top platforms without damaging the floor or the stones.

As for lifting the stones, there are some basic cautions to be concerned with for safety.

I have seen athletes twist at the top of a stone load. If you are going heavy or you are doing reps to failure for conditioning, once you get the stone to the tip of the platform, do not pause in that top position longer than a few seconds, and do not twist in order to try to get it onto the platform, as accidents have happened at this point before.

HEIGHT OF PLATFORM

If you use a platform for stone loading, for most stone training I think it is best to use a platform that is around sternum height or somewhere below. This is a good position, especially if you are training for a particular sport that requires hip drive and/or triple extension like a football player exploding off the line of scrimmage or a swimmer leaping off the diving block.

As a variation and progression from the normal platform, we also sometimes use a hanging target. It may be a jump stretch band or a large rope hanging from a rafter or a power rack. We dangle the band or rope from the rack as a goal upon which to touch the stone. When you touch the top of the stone to the bottom of the band, you have achieved your goal. You can also have a partner pull the band/rope up slightly after each successful rep, so you try to increase the height on each rep.

LEARNING THE TECHNIQUE

I will discuss the best way that I have found to lift an Atlas Stone, although we all may lift them slightly differently.

In training, strive to keep good form so you can strengthen your body using the safest way of lifting. As for myself, when it comes to lifting the stone, I first position the stone about 6”-8” away from what I may be loading it onto. I then face the Atlas Stone and straddle my feet over it so that my calves are around 1” from it on both sides. I make sure I stand almost directly over the stone so the balls of my feet are positioned at the center point of it.

Next, I squat down to near parallel, grabbing the stone with my arms straight down and hug the center of it with my forearms and hands trying to get my fingers as far under the stone as possible without smashing them. My finger nails will likely be touching the ground at this point.

I then squeeze hard with my fingers, hands, forearms and begin to pull with my legs and entire back. This is when I think of contracting with everything I have. My legs straighten slightly as the stone begins to come up, although the legs are never completely straight. As the stone starts to pass my knees, I then re-bend my knees back into a near parallel squat and I roll the stone onto my lap. If possible, I also may try to walk my feet in slightly. Since I’m resting the stone on my lap, bringing the feet together will position the stone higher on the abdomen when I start the second part of the lift.

From here, I will reposition my hands more towards the top of the stone maybe about 1/3rd of the way up but not all the way on top or the stone will drop down. Your palms will not be facing each other any longer. They are now angled more towards the ground. I squeeze the stone again and press it against my chest so my chin is as far over the stone as possible. Then I will dip forward and down slightly to get a stretch reflex and pull back explosively with my upper body, forcefully standing up and driving my hips forward.

If I am just lifting the stone to the high chest and then returning it to the floor, I try to keep the center of the stone directly over my feet and lean back slightly to keep my balance. If I am loading the stone to a platform or over a marker, then I will propel it upward and forward, as shown in the image above. If loading on the platform, I also quickly reposition my arms just in case I don’t quite make it and I have to push it fully onto the platform.

BEGINNER WORKOUTS

You now have an idea on technique. Let’s look at how to train with the stones.

For a beginner workout, I suggest you work with a light stone and focus on reps so you get used to the proper technique as well as conditioning your muscles for something they are not used to doing.

Even if you are a very strong athlete, I suggest that you keep to a stone around 200lbs or under to start with. If you are in good condition and you are new to stone lifting, try not to exceed a stone that is anything above 70% of your bodyweight. In other words, if your bodyweight is 100lbs, use about a 70lb stone, or if you weigh around 180lbs you would use about a 130lb stone, plus or minus a few pounds.

Take this stone and load it for 2-3 sets of 5-8 reps and 2-3 times per week for the first three weeks so you work on technique and conditioning. You may be tempted to go heavier, but just remember the best is yet to come so take it slow. Just try to improve your technique with the lighter stone.

For a stone workout that is centered on hardcore conditioning, you might try the following variations. Pick out a lighter stone and break the stone lifting technique down into segments. You will do the following stone lifting segment work for 3 sets of 10 reps.

The first 10 reps will be the LAP, SQUAT, DROP drill. To begin, pick up the stone, LAP it to the SQUAT position and stand up driving hard with the hips, pushing the stone upward and forward as high as you can. Then, DROP the stone on rubber mats and repeat.

For the next 10 reps, try the LAP, SQUAT and RETURN drill. In this drill, you will LAP the stone, SQUAT it up, and then this time RETURN the stone under control to your lap. Do this for 10 reps but DO NOT drop the stone.

Rest again and for the last 10 reps, do the LAP AND DROP drill, lapping the stone and then dropping it back down between your legs. Repeat this for 10 reps.

If you still have some gas in the tank, you might also finish off with 10 reps of bent over rows with an even lighter stone.

Start light with this series of drills because this can leave you exhausted and sore for days.

REVIEW

As you can see, Atlas Stone lifting can be a very beneficial practice that can quickly have you building muscle, burning calories, and becoming more powerful. This is particularly helpful for power and combat athletes that need to drive with the lower body, and also certain professions such as Law Enforcement and Corrections Officers who have to be able to subdue perpetrators.

With all the benefits of stone training, there are some risks involved, but the benefits far outweigh the risks. As you train, start out light and use caution. Also, condition yourself to the stresses of stone lifting. As you progress, you can add equipment into the mix such as loading platforms, hanging targets, and drop areas, and before you know it you will be performing drills for speed, explosiveness, and conditioning. In time, you will be extremely rugged.

For more information on Atlas Stone training and many other types of Strongman Training events, please check out my Strongman DVD, Introduction to Strongman Training. Loaded with technique and safety tips, I can show you how to correctly train like a Strongman or Strongwoman. And whether you ever enter a competition or not, you will definitely be a stronger version of yourself in no time.

Steve Slater
Click here for the Introduction to Strongman DVD

Thanks for coming to the Diesel site today. I hope you had an extraordinary weekend!

This past weekend, I watched my first strongman contest in about a year and a half and it was a great time. Man I miss competing!

I didn’t get to see the whole thing, but I did catch the dumbbell press for reps and then the stone event.

I noticed some things I want to talk about so maybe I can help some dudes out…

All the strongman contests I did that had the atlas stones in them required the lifter to pick the stones up and place them on top of a platform. This event was run another way, where the athlete has to pop the stones up over a bar about 50 inches high. Pretty cool!

Regardless of the loading technique, one thing that caught my eye was how the athletes were ( or were not) wrapping their forearms.

When I lift atlas stones, I wrap my forearms with sports tape. I talk about this in our Stone Lifting DVD. Wrapping the arms in sports tape accomplishes two things: it serves as a removable base for your tacky and it offers skin protection against scrapes.

REMOVABLE BASE FOR TACKY

The main reason I strongly suggest wrapping the forearms for the stones is because it serves as a nice removable base for tacky.

Almost every strongman competitor I know of uses tacky. The only ones who don’t are not able to maintain the same competitive level as the ones who do because they have to try harder just to lift the stone off the ground.

The whole idea behind using tacky is to help you lock onto the stone when pulling it off the ground and when loading it onto the platform or over the bar. The bad thing is that it can be a pain in the ass to get off. While rubbing Baby Oil on it will take it off, it requires quite a bit of rubbing to break up the components of the tacky. You can make it a lot easier on yourself to clean the tacky off by applying it to the layer of tape on your forearms, as opposed to applying it to your skin and then rubbing it off.

SKIN PROTECTION

Another reason for wrapping the forearms is to protect the skin. The stones can be very rough and will literally rip the outer layers of the epidermis off your arms. I spoke about this with one of the competitors who had not wrapped his arms and his reply was “I’m tough. I can handle it. It’ll heal.”

Yes, it will heal if you scrape the skin off your forearms, but that isn’t the point. The reason to cover your arms with tape is so that you don’t end up with any distractions while lifting the stones.

You have enough to worry about as a strongman competitor: the crowd daring you to go heavier and faster, maintaining your technique, keeping your breathing regulated. All this stuff is racing through your head while you are trying to load the stones. Do you really need to feel the pain of the stone tearing your skin in addition to all of that?

Even minor pain can be enough of a distraction that can knock you off your game. If the main contact points of your forearms get scraped on the third stone, what are you going to do, change the way you lift the next two? Mid-run through the stones, modify your technique? I don’t think so.

That very athlete that said he was tough enough to go without tape on his forearms, also failed to load the stone that would have given him sole possession of first place in that event. Oh, and I glanced at his left forearm after the event, too, and he had a giant strawberry scrape mark on it that looked like the road rash dudes get when they fall off their motorcycle. There is no way that he was completely 100% focused on lifting and popping the stone over the bar today when his skin was getting ripped off his arm.

Take my advice – wrap your forearms with some tape the next time you train or compete in stones and your performance will improve.

Another thing I noticed was that some competitors were wrapping their forearms not in sports tape, but in duct tape. This, I thought, was a serious mistake because duct tape is smooth. It seems like that would work against you in the stones, and it looked like the handful of competitors with duct tape on their arms were having a hard time with this.

To the contrary, sports tape has a moderate texture and natural stickiness to it. Sports tape, in my experience, even without tacky, will give you a little better grip on most stones than bare skin alone. The only stones that I have lifted that felt easier to lift with bare skin than with tape on the forearms are the polished granite spheres I have lifted at Pat Povilaitis’s house. Their ultra smooth surface seemed to grip better against the forearms than other atlas stones made from concrete poured into plastic molds, which the vast majority of strongman event atlas stones are made of.

I go over all of this and more in our Stone Lifting DVD. I firmly believe that the information on that disk will help anyone become a better stone lifter, especially new guys who are just getting into the sport, but I’d love to hear how you feel about this wrapping deal.

I know a lot of strongman competitors come to the Diesel site, so I’d like to know what you all think.

Should you wrap your arms or leave them bare?

Should you wrap with sports tape or duct tape? Something else?

Weigh in with how you feel. You may just end up helping somebody improve on the stones as well.

All the best in your training,

-Jedd-