A few weeks back, I attended the PA Strength and Conditioning Clinic at Juniata College in Huntingdon, PA. A few weeks prior to that, I had written some of my good friends who attend the clinic each year and told them I was really looking forward to meeting up with them and hitting a good, solid, hard workout.

The reason I did this is because I wanted to just go there and relax and just blow off some steam by putting one another through the ringers, challenging one another in a nice, conventional workout in the gym.

So, Jerry Shreck, from Bucknell and Bobby Fisk, from Hobart, all met up and just threw down for about 2 solid hours of lifting with no real plan except to leave everything we had in the weight room.

Here is what we ended up doing.

---

Part I: Overhead Lifting

This portion starts out with some One Arm Snatch and One Arm Clean Clean and Press using Dumbbells. I was really looking forward to seeing how much I could do in these lifts, for two reasons.

First, the heaviest dumbbells I have in my gym is 110-lbs, and I seemed to remember Juniata’s going up to 150. Unfortunately, I remembered wrong, because they only went up to 120’s.

Second, there had been a post on the Gripboard talking about the heaviest One Arm Press people could do with no leg drive and starting with the dumbbell in contact with the shoulder. In training, I had gotten 100-lbs but kept missing with 110, so I was looking forward to seeing what I could.

The Snatches just happened because I figured I might as well start out with at least one fast lift, plus the Snatch takes nothing out of me for the Clean and Press so it ended up making sense.

For the Snatch, I ended up getting 120-lbs right handed. I was happy with this, but I know I could have gotten more, especially after Jerry cued me to keep my back straighter – everything felt more efficient after that and was much easier.

For the Clean and Press, I knocked out 110 without any leg drive whatsoever. On 115, I came very close, but I lost my balance a bit and had to move my feet to keep from falling over, so I can’t count it.

From there, we did some Pressing Ladders, where I started with 85 X 1, then 80 X 2, 75 X 3, 70 X 4, and then tried to reverse it back to 85X 1. I came close but didn’t quite finish it off.

---

---

Part II: Rows and Chest Press

Sadly, this is the part of the workout that really messed Jerry up. He had a pretty significant injury to his left forearm that kept him from hitting the numbers he really wanted to so, I know that he will be going after some payback sometime soon. Maybe we will have to meet up at Bucknell sometime for another encounter.

This video starts of with some Low Cable Rows. We started out with the whole stack, level 20, and we performed 5 reps there, then we would drop one plate off the pin and hit 5 more reps. This is where Bobby jumped in with us and proved that they don’t mess around in their training at Hobart.

I really liked this exchange. It was awesome having a pin-selected stack to work with. At my place, my Low Cable Row machine has an actual loading pin, so if I want to drop weight from it during a set, I have to stand up, walk 4 feet to unload, and then get back in position. Being able to just sit forward and have someone else adjust the pins was awesome.

Next, we hit the Chest Press Machine. We started with the stack again, and then dropped two plate positions, hitting 5 reps at each stop. This machine proved to be fairly surprising in the area of difficulty. It had been a long time since Jerry and I had worked on a machine like this, and the bottom of the movement as well as the lockout were much more difficult than the regular Barbell Bench Press.

With this in mind, it could be a good idea to work some machines in every so often in order to shock the muscles a bit and keep them guessing. As I told Bobby, “It’s a different hard. It can still make you better.”

---

---

Part III: Curls, Upright Rows, Side Laterals, Posterior Flyes

As I was walking around the gym warming up, I saw this freakin’ awesome angled handle barbell. I know Coach Smith from Juniata has all of the best equipment for his football players, so it didn’t surprise me that he’d have a barbell like this. Bobby and I jumped on it right away, throwing a 10-kilo plate on there and performing a few sets of curls. It felt awesome and there was absolutely no stress on the wrists or forearms whatsoever curling with this barbell.

After that we set up a combination for the shoulders. Lift A was Upright Rows, which I haven’t done in years, but have added in a bit recently using only the EZ Curl Bar. I have actually coached people NOT to do Upright Rows in the past, but with the form I use in the video, I think they are much safer than the regular form used with barbells. We combined that with a superset of Side Laterals and Posterior Flyes performed with Chains.

This was an AWESOME burner for the shoulders. What’s great about the chains is they are very light at the bottom and then KILLER HARD at the top. With the lighter resistance at the bottom, they do not strain the rotator cuffs like dumbbells would, and the difficulty only ramps up when you get out of the range where the rotator cuffs are doing all of the work.

I LOVED this workout. The only things that could could have made it any better were if my two regular lifting buddies, Mark Gannon and JT Straussner, would have been there, and if we would have thrown in some Grip at the end. However, I took a 3-week hiatus from Grip Training after nationals, so the only grip I did during that time was holding the weights in my regular Strength and Mass Building lifts.

---

---

I hope you enjoy the videos. If you have any questions about the training, please feel free to leave a comment below, or right on the YouTube video pages.

Also, make sure to subscribe to my channel by clicking here.

All the best in your training.

Jedd

P.S. Be sure to keep an eye out for more updates from Juniata. I still have a few more training and learning tidbits I will be sharing from my time there. Stay Tuned.

---

Start Strongman Training and Take Your Strength to New Levels

---

My absolute favorite type of Strength Training, aside from Grip, is Overhead Lifting. Whether done in strict fashion, like a press, or a more dynamic fashion, like a jerk, it is all good to me.

As I highlighted in a recent video, I had been having discomfort near my right collar bone which was interfering in some of my lifts.

Initiating movement out of the rack position was causing difficulty for me on strict movements, such as the Barbell and Dumbbell Press. I mentioned it in this video: My Approach to Overhead Work.

Well, there was no way I was going to cut Overhead Work out of my program. After all, it was only a few lifts that caused me problems.

Since straining out of the rack position was feeling like someone was driving a wooden stake into my chest like I was a vampire, I just didn’t do strict press.

Instead, I cycled in Push Press and Jerks, and there was almost ZERO pain when I trained.

I think many people make the mistake of just shutting things down when they have an injury, especially something minor like I was having. To me, work-arounds such as exercise replacements are much better options and keep you from losing strength while you recover.

In fact, last week, I found that even though I had not done tried 100-lb Dumbbell Press since June, I was still able to match my all-time personal best of 3 Reps.

The only thing I did notice is that I felt slower out of the rack position, which makes complete sense, since I had not worked that specific portion of the lift in a few weeks. In fact, I think if I had been working the rack position intensely all of this time, I probably would have hit 4 or even 5 reps.

I say this because being slow out of the whole made me work harder for the lockout, and if I had more burst out of the bottom, I would have had more left for the lockout. Just speculation, of course…

If you currently have shoulder pain, you need to stay tuned to my site or, even better yet, sign up for my newsletter. Two of my friends, Rick Kaselj and Mike Westerdall have teamed up to put together an excellent resource for recovery from Shoulder Pain.

I reviewed almost all of it on Friday and this thing is packed with info. It is going to help a lot of people get out of pain.

And the best part is, it is designed specifically with people who train hard and take their workouts seriously in mind.

Sign up below for updates if you haven’t already, and all the best in your training.

Jedd

I have been continuing my pursuit of improved pressing power as well as improved flexibility, range of motion, and thoracic mobility in my training.

As I have outlined before, as my movement quality improves in my upper body, my lifts continue to go up, which is no surprise.

However, I am used to having to put in hours and hours of intense training in order to see the awesome improvements I have been seeing the last few weeks.

Being able to move up in my overhead press simply by including simple stretches and other soft tissue and mobility work is really blowing me away. But I’m not complaining though!

New PR: 100-lb Dumbbell Military Press

Last week, I was able to “clean” two 100-lb Dumbbells to my shoulders and then press them overhead to lockout for two sets of singles.

---

---

Questions on Pressing Exercise Selection

I received a question in the comments on this video, so I thought I would address it here…

Question: I prefer doing those sitting down. I can do a couple of reps on 200lbs sitting down with supported back. Not standing up. I think I can do heavier weights sitting down. Don’t you like sitting? Any benefits standing up that I miss out on sitting down?

Answer: It isn’t that I don’t like performing my presses sitting down. My preference is to do them standing because it is more of an athletic position to be standing. My background is in athletics, so I prefer closed-chain lifts, where you are standing and the body bears the weight, rather than sitting.

As far as a “back safety” perspective, there is actually increased risk for some people to perform exercises seated, especially overhead work, because of compressive forces in the lower back. If I do seated press, I really feel these compressive forces. I do not feel them at all when standing.

As far as the supported back, to me that just gives an advantage to the lift. Stability is increased, so you probably can press more weight sitting down, but maybe that means your core is not as strong as it should be. Doing presses standing is a less stable movement, meaning it will require more out of you to perform them.

Highlights from the Above Workout

After the first set where I used my legs to get them to my shoulders, I just had to try to do a power curl and sure enough was still able to press them.

This is a feat that even at my very strongest when I was between 24 and 26 years old I was never able to accomplish. My best overhead lift with dumbbells that I can remember was either 120 or 125-lb dumbbells, but I had to Push Press them in order to lock them out.

In the past, a lot of my overhead work was marked with extreme backward bending. While the video may look like I am doing that above, it is nowhere near what I used to do. My glutes fire hard to help with stability, and that bring my hips forward, but the legs are not pushing and I am not actively arching myself under the weight like i used to do in the past.

I am still not getting the thoracic extension I want, so I need to keep working at that. I am sure it will come with continued focus on that aspect.

Protocol I am Using

If you want to see the main flexibility and mobility drills I have added to my routine, then check out this post: Continued Improvement in Overhead Press. They are very simple and add very little time to your training. I mainly do them during my rest periods between sets.

On top of those drills, I have also gotten some horse liniment from Absorbine. This stuff smells horrid. It is so bad that I subconsciously forgot about it after using it just once, but other clients who visit the same massage therapist I do have claimed it has really helped them out with pain and inflammation reduction. So I want to keep trying it.

Massage Therapy Updates

I had my second massage session targeted specifically for improving my shoulder/torso health today and we now have two plans of attack…

1. Root Cause of it All? I dropped a bar on my chest in January of 2009 that really did some damage to my sternum. Like an idiot, I never got that checked by a doctor, so I was never given a diagnosis of exactly what happened, but after talking about the last few years of training, my therapist and I have narrowed that down as one of the primary causes for underlying issues in my shoulder.

Again, that is only one underlying cause. The hours I have spent working at desks over the last 4 years have not helped, along with other postural behaviors. However, immediately after that happened, I remember feeling like if I puffed my chest out too far, my sternum would hurt, so it is reasonable to think this might be where the problems started.

2. Rotator Cuff: Today, before our session, I told the therapist my left lat was really sore at the insertion point. Unfortunately, I was wrong, because it isn’t my lat, it’s my rotator cuff. She discovered that some of the muscles in my left rotator cuff seemed to be extremely tight. I know that they were extremely sore when she stimulated them. So if I have an injury there, it could be that the prime movers, especially the pecs and teres major might be trying to safeguard the joint my immobilizing it.

I can tell you one thing that is for sure – when I try to lift the Inch Dumbbells in a suitcase deadlift, there is some intense pain in my left shoulder which burns like someone is jabbing me with a red hot fireplace poker, so I am going to add in some more rotator cuff work as well.

I am also continuing to powder my day with extra rest breaks from the computer and time in the doorway doing a variety of stretches. I have lots of doorways in the house and I just hang out in them while I do things like wait for coffee to brew or as I warm up my green eggs and ham in the microwave (just checking to see if you are reading).

I am Pumped: Continued Progress

Improvement has been a slow process, but I am still progressing forward. I like Instant Gratification and just want to wake up one day with super supple shoulders and impeccable posture, but I know that when something is allowed to get bad for many years, it is going to take some time for it to improve. I think this multi-faceted approach to improving flexibility, mobility, soft tissue quality, etc will all pay off for a great deal of improved performance in more than just my pressing.

And despite the slow progress in my flexibility, there is no arguing with the increases I have been seeing in my overhead work.

Despite the tweaks here and there, I am pumped. In January, I would have been happy to get the 85-lb dumbbells for a single. I have now done those for a set of 6 and the 100’s for two singles, so I am psyched.

I have to get back to work on some other posts I have planned for this week. make sure you are signed up for updates. You can do that in the form below.

All the best in your training.

Jedd

---

New Release from Diesel Crew & Slater’s Hardware

How to Make Atlas Stones

---

Improving Overhead Press

What’s up DIESELS?!!
Over on my Grip Strength Coaching Site, TheGripAuthority.com, from time to time I will put up a video just telling my guys and girls what I have found in my training to be really working well for me. I pass this on to them so that they can try it in their training and see if it works for them as well. I’d love to help you towards your Grip goals, so join today at http://www.thegripauthority.com.
They seem to get a lot of it when I put up the What’s Working Now posts, so I thought I would start doing the same here occasionally as well.

What’s Working Now – Overhead Work

Today, I want to talk a little bit about some results I am seeing in my training with my overhead work.
First a little recent history…
Most of my overhead work the last couple of years has been with a log. I’d estimate about 60% of it has been based around the strongman log, and more than half of that has been in a push press or jerk style.
Last summer, when some lower back troubles reared their ugly heads, I began doing my overhead work in a more strict fashion in order to have a bit more control over the implement. I also began using more conventional equipment, such as the barbell and dumbbells.
In October, I added some more dumbbells to my collection. Previously, my dumbbells went from 50-lbs straight to 85lbs. I now have a pair of 55’s and a pair of 70’s. With more dumbbells to choose from, I became more interested in using them, and I started establishing some new PR’s.
Here is where it all gets interesting…
From November until the end of January, my best set of 70-lb Dumbbell press was a set of 7, and I only managed that one time. Below that, my best was 3 sets of 5, but they were done seated, so it is kind of hard to compare them really well.
In November, one day I decided to see if I could pres my 85’s. It was nearly embarrassing how tough it was to get one repetition, and that was all I got. This one repetition was so disgustingly difficult, I did not try it again for over two months.
Then on February 14th, after doing some intense Myofascial Release techniques for my pecs prior to the workout, I was amazed at how good it felt to press. This was done with a barbell, standing, and I took it out of the rack. I was able to press 205 for the first time in many, many years. I’d estimate the last time I pressed that kind of weight on a barbell out of the rack was in 2008 when I did Wendler’s 5-3-1 for a while. So it is not really an all-time “PR,” but it felt outstanding, so I continued to do the SMR work in between each set, as I moved into Dumbbell Presses.

I started off with a token set of 6 with 50-lb dumbbells, and then move right into 70-lbs for the next set. To my astonished amazement, I got 10 reps. I continued doing the SMR and even added some stretching of the pecs between sets. DIESELS – it was awesome. I got 10 reps for all 3 sets. This was an all-time dumbbell press PR and it was after a 3-set session of standing barbell press, so I was pre-fatigued to a degree.
To say that I could not wait until my next pressing workout would be an understatement. My next session was February 22, and as I moved into Dumbbell Presses, I did the same thing as before, a token set of 6 with 50’s and then I moved into my work sets, but this time I said SCREW THE 70’S, and went right for the 85’s.
Below are my 3 work sets with 85’s…

Despite the fact that I was able to get 2 reps for the first time ever during set 1, I could really tell that my pecs were feeling tight.
If you watch set 1 again, you can see how I have to fish around for body positioning in order to press them up. So, I gave the pecs some serious attention prior to set 2.
For set 2, after the extra SMR work and stretching, the first 2 reps shot up really easy and I even had enough left in the tan for a third rep and a partial 4th.
After more pec work between set 2 and set 3, I was able to muster 4 repetitions, despite being fatigued in the triceps at this point, but since I was feeling less restricted in the chest, I was able to get better drive from the bottom position.
So you might be asking yourself, what does the chest have to do with overhead press?
Well, it can have a lot to do with your overhead press if you are a tight son of a bitch.
You see, if you are tight in the chest, then when you are trying to drive through the overhead pressing movement, you are going to be hindered. If the muscle and fascia of the front torso are too tight, then there’s no way you can lift overhead to your full potential. Your shoulders are going to be pulled forward and in, instead of wide like they need to be to press well.
Watch the difference between set 1 and set 2 in the video above and you will see what I mean along these lines. In set 1, I am still tight and restricted. My shoulders are pulled forward and I need to do all sorts of leaning in order to groove the dumbbells up.
After very aggressive work to loosen things up in my chest, it felt SO MUCH better to really extend through the thoracic spine, my shoulder blades felt like they could move more freely, and as a result, I was able to get better quality reps and one more rep, to boot.
For set 3, again, the torso felt better, thoracic extension felt easier, the scapulae were tracking better, and I was even able to get a 4th rep.
My next pressing workout is scheduled for Tuesday this week, BUT it is a deload workout with Mighty Mitts coming up, so the programming isn’t working out to push for a new PR, just yet, but I definitely plan on continuing the aggressive soft tissue work between sets.
In fact, I have been continuing the aggressive soft tissue work on non-upper body training days, because I really want to keep this momentum going.
I will report back soon.
SPECIAL NOTE: I absolutely feel that this kind of work to loosen up your tight chest can help for any type of overhead pressing, whether with dumbbells, barbell, axle, log, et cetera.
FEEDBACK WANTED: Is this kind of information something you’d like to see more of here on the site? Most of the content I post here is in article format, and this entry was more of a narrative report than anything else? I am interested in what you think, so please leave a comment below.
Thanks and all the best in your training.
Jedd

---

Want to start training like a Strongman, but not sure how or where to start? Looking for the Technical Guidance you need to excel in Strongman Competition?
Pick up our DVD and learn everything you need to know about the Log, Farmers, Stones, Odd Objects, Yoke, and MORE.
Check it out today:

---

Improving Overhead Press

What’s up DIESELS?!!

Over on my Grip Strength Coaching Site, TheGripAuthority.com, from time to time I will put up a video just telling my guys and girls what I have found in my training to be really working well for me. I pass this on to them so that they can try it in their training and see if it works for them as well. I’d love to help you towards your Grip goals, so join today at http://www.thegripauthority.com.

They seem to get a lot of it when I put up the What’s Working Now posts, so I thought I would start doing the same here occasionally as well.

What’s Working Now – Overhead Work

Today, I want to talk a little bit about some results I am seeing in my training with my overhead work.

First a little recent history…

Most of my overhead work the last couple of years has been with a log. I’d estimate about 60% of it has been based around the strongman log, and more than half of that has been in a push press or jerk style.

Last summer, when some lower back troubles reared their ugly heads, I began doing my overhead work in a more strict fashion in order to have a bit more control over the implement. I also began using more conventional equipment, such as the barbell and dumbbells.

In October, I added some more dumbbells to my collection. Previously, my dumbbells went from 50-lbs straight to 85lbs. I now have a pair of 55’s and a pair of 70’s. With more dumbbells to choose from, I became more interested in using them, and I started establishing some new PR’s.

Here is where it all gets interesting…

From November until the end of January, my best set of 70-lb Dumbbell press was a set of 7, and I only managed that one time. Below that, my best was 3 sets of 5, but they were done seated, so it is kind of hard to compare them really well.

In November, one day I decided to see if I could pres my 85’s. It was nearly embarrassing how tough it was to get one repetition, and that was all I got. This one repetition was so disgustingly difficult, I did not try it again for over two months.

Then on February 14th, after doing some intense Myofascial Release techniques for my pecs prior to the workout, I was amazed at how good it felt to press. This was done with a barbell, standing, and I took it out of the rack. I was able to press 205 for the first time in many, many years. I’d estimate the last time I pressed that kind of weight on a barbell out of the rack was in 2008 when I did Wendler’s 5-3-1 for a while. So it is not really an all-time “PR,” but it felt outstanding, so I continued to do the SMR work in between each set, as I moved into Dumbbell Presses.

I started off with a token set of 6 with 50-lb dumbbells, and then move right into 70-lbs for the next set. To my astonished amazement, I got 10 reps. I continued doing the SMR and even added some stretching of the pecs between sets. DIESELS – it was awesome. I got 10 reps for all 3 sets. This was an all-time dumbbell press PR and it was after a 3-set session of standing barbell press, so I was pre-fatigued to a degree.

To say that I could not wait until my next pressing workout would be an understatement. My next session was February 22, and as I moved into Dumbbell Presses, I did the same thing as before, a token set of 6 with 50’s and then I moved into my work sets, but this time I said SCREW THE 70’S, and went right for the 85’s.

Below are my 3 work sets with 85’s…

Despite the fact that I was able to get 2 reps for the first time ever during set 1, I could really tell that my pecs were feeling tight.

If you watch set 1 again, you can see how I have to fish around for body positioning in order to press them up. So, I gave the pecs some serious attention prior to set 2.

For set 2, after the extra SMR work and stretching, the first 2 reps shot up really easy and I even had enough left in the tan for a third rep and a partial 4th.

After more pec work between set 2 and set 3, I was able to muster 4 repetitions, despite being fatigued in the triceps at this point, but since I was feeling less restricted in the chest, I was able to get better drive from the bottom position.

So you might be asking yourself, what does the chest have to do with overhead press?

Well, it can have a lot to do with your overhead press if you are a tight son of a bitch.

You see, if you are tight in the chest, then when you are trying to drive through the overhead pressing movement, you are going to be hindered. If the muscle and fascia of the front torso are too tight, then there’s no way you can lift overhead to your full potential. Your shoulders are going to be pulled forward and in, instead of wide like they need to be to press well.

Watch the difference between set 1 and set 2 in the video above and you will see what I mean along these lines. In set 1, I am still tight and restricted. My shoulders are pulled forward and I need to do all sorts of leaning in order to groove the dumbbells up.

After very aggressive work to loosen things up in my chest, it felt SO MUCH better to really extend through the thoracic spine, my shoulder blades felt like they could move more freely, and as a result, I was able to get better quality reps and one more rep, to boot.

For set 3, again, the torso felt better, thoracic extension felt easier, the scapulae were tracking better, and I was even able to get a 4th rep.

My next pressing workout is scheduled for Tuesday this week, BUT it is a deload workout with Mighty Mitts coming up, so the programming isn’t working out to push for a new PR, just yet, but I definitely plan on continuing the aggressive soft tissue work between sets.

In fact, I have been continuing the aggressive soft tissue work on non-upper body training days, because I really want to keep this momentum going.

I will report back soon.

SPECIAL NOTE: I absolutely feel that this kind of work to loosen up your tight chest can help for any type of overhead pressing, whether with dumbbells, barbell, axle, log, et cetera.

FEEDBACK WANTED: Is this kind of information something you’d like to see more of here on the site? Most of the content I post here is in article format, and this entry was more of a narrative report than anything else? I am interested in what you think, so please leave a comment below.

Thanks and all the best in your training.

Jedd

---

Want to start training like a Strongman, but not sure how or where to start? Looking for the Technical Guidance you need to excel in Strongman Competition?

Pick up our DVD and learn everything you need to know about the Log, Farmers, Stones, Odd Objects, Yoke, and MORE.

Check it out today:

---