First Feat of Strength for Beginners

I’m often asked by readers and viewers what is the best way to get started with Oldtime Feats of Strength, like bending and tearing things.

There’s one single feat of strength that I believe you should begin with…

First off, feats of strength require you to be able to produce tremendous pressure with the hands, so you should begin with something that checks that box.

Next, aside from being able to latch onto something hard with your hands, you also need to be able to make what you’re bending or tearing do what you want it to.

You have to be able to overcome whatever it is that you’re working on, so this introductory feat has to involve movement as well as the tension requirement

On top of all that, your first feat challenge needs to test you mentally. Often, when trying to bend or tear something, your mind gives up long before you hands do or your body does.

So you can’t just start bending paper clips or wire hangers. There’s gotta be some sort of mental challenge to it.

Finally, and I think this is something that a lot of new feat fanatics forget about, is there needs to be a low level of risk involved. This way, you don’t hurt yourself, and screw up not only your new hobby, but also all the other strength training and other strength goals you have.

For instance, it’s really easy to go overboard with steel bending, or pop something in your shoulder, because of the increased levels of strain.

As a bonus, it’s nice if the thing you’re starting off with is fairly affordable and easy to get, so you’re not blowing through paychecks and combing the edges of the internet trying to find some rare stock to work with.

So with all these factors considered, I believe the perfect feat for you to start out with is CARD TEARING.

Card Tearing teaches you not only about the application of force from your hands into the cards, but also how you can direct this force into the deck at various angles.

Once you learn this, it’s a much easier jump to bending nails, steel bars, horse shoes, etc.

Before you know it, you’re bending and tearing everything in sight!

While it may not seem so, tearing cards also requires mental fortitude, because it isn’t by any means easy, and you have to push yourself to complete the tear.

Finally, cards are available EVERYWHERE! From the local super market, to the various dollar stores, to ebay, casinos, and more – decks of cards are constantly at your fingertips.

For all these reasons, and probably more that I’m not thinking of, if you’re thinking about getting started with oldtime feats of strength, your best bet is Card Tearing, and I’ll show you everything you need to know in my ebook, the Card Tearing System

Thanks and all the best in your training.

NAPALM

P.S. If you’re not sure if you’re strong enough to start tearing cards, don’t worry – I got you covered with an extensive exercise index in my Card Tearing eBook Grab Your Copy Today!!!

Atlas Stone Lifting

20-inch Diameter Stones weighing in the 320-530lb Range

Steel Bending Resources

This past week, I released my latest steel bending product, the Less is More Steel Bending Workout.

One component of the product is the accompanying Workout PDF. I wanted to do something special for those who picked up the product, and I compiled a list of the videos about bending I’ve put up on YouTube and all the articles I’ve put up about bending here on the site.

Unfortunately, I can’t get the links to all of these videos to work, so I’m posting them here, and everyone will be able to check them out.

If you haven’t picked up your copy of the Less is More Steel Bending Workout, make sure you do it fast, while the introductory price is still available.

Steel Bending Videos

Grade 8 Bolt Bent with Head Removed

7″ FBBC Stainless Bastard Bar Reverse Miss

6″ x 1/4″ Grade 8 with Head Removed (Miss)

6″ x 1/4″ Square Cold Rolled Steel – Reverse Bend – 11/6/16

Grade 8 Bolt Reverse – 11/6/16

9/32″ x 6″ Reverse Bending | Prep for Gripmas 2016

Volume Bending to Improve Top Bending Strength | Cooking With Napalm

Mason’s Hope Strongman Show 2016: Horseshoe Bend

Mason’s Hope Strongman Show 2016: Bending a Widow Maker

Masons Hope Strongman Show 2016: Breaking a Nail to Pieces

Will Sledge Hammer Levering Help My Nail Bending?

Viewer Asks “What’s Your Biggest Accomplishment?”

Nail Bending, Inch Dumbbell, and My Physique – Cooking with Napalm

Red Nail Reverse Bend & Measure Only

Red Nail Reverse Bend – Full Wrap / Bend / Measure Video

Bending Steel | Red Nail Reverse Bend Attempt – 5/16×7 Cold Rolled Steel

Nail Bending Questions & Answers – Cooking with Napalm

Strongman Feats: Bending a Hammer

Strongman Feats of Strength: Bending a 60D Nail

Strongman Feats: Jedd Johnson Bends a Horseshoe

Strongman Jedd Johnson – Bending a Drop Forged Steel Wrench

Strongman Jedd Johnson – Bending a Carpenter’s Hammer

Strongman Jedd Johnson – Bending a Horseshoe

Strongman Jedd Johnson – Bending a Frying Pan

Strongman Bending 8″ Steel Wrench

Strongman Wrench Bend

60D Nail Break Under 3 Minutes

Nail Bending – Double Overhand Technique

Napalm Bends the Red Nail

Napalm Bends the Red Nail

Napalm Gets Called Out

Steel Bending Articles

5 Tips for Bending a Wrench

Welcome to the Jungle – The Ultimate Form of Bending

The Importance of Double Compression in Bending

Balancing Steel Bending with Other Training

8 Reasons to Start Bending Horseshoes

Success Stories: Bending Your First Horseshoe

How the Strength of Steel is Determined in Steel Bending

What You Need for Horseshoe Bending

What Sets Horseshoe Bending Apart from Other Strength Feats

The Journey Into Nail Bending

Isometric Hammer Work for Bending Success

4 Ways to Improve the Kink for Reverse Bending

Nail Bending and Variation of Metals

Intro to Nail Bending

Advanced Nail Wrapping

Will Sledge Hammer Levering Help Me Bend Bigger Bars?

Red Beard Power – Adam Moyers Bends the Red Nail

Interview with the Red Dragon Slayer – Nate Brous

Feats of Strength: Nail Breaking

Horseshoe Progression List

Rick Giese Bends the Red Nail

Rolling Frying Pans and Managing Radiant Tension

Chicken Winging and Angry Texting

What is the Best Material for Wrapping Nails?

Steel Bending Workout

The latest Workout of the Month is ready to go!

Last month was a wrist and lower arm primer workout to get you ready for steel bending, call the Sledge Only Workout.

Now, with a few weeks of wrist training under your belt, it’s time to try your hands at bending, and I’ve got the workout program for you to get started the right way.

This month’s steel bending workout is called the Less is More Bending Workout.

When you click that link right above, you’ll learn EXACTLY why I called it that.

But here’s the short version: I think most benders do TOO MUCH bending, and end up setting their progress back, because of all the excess work they do.

The point of this month’s workout is to keep the volume under control, help you stay strong throughout your steel bending journey, and then you’ll be on your way to the big steel FASTER!

I can’t wait to hear your feedback on the Workout, after you go through it.

Grab your copy today here => Steel Bending Workout.

All the best in your training.

Jedd

I have a few sayings I’m known for.

One of them is, “It’s not about how much you lift, It’s about how much you LOVE Lifting.”

What that means is, lifting is about being passionate about something and doing it with fire.

Lifting is about setting goals to always be improving.

Lifting is about feeling good, and feeling good about yourself.

So, a couple months ago, or so, when I really took a look at some of my training, I came to realize I wasn’t following my own advice.

The whole idea about that saying is that you should be pushing yourself because you love lifting.

It has nothing to do with pushing yourself so hard that you reach your goals at the expense of everything and everyone else.

But, there I was, trying to reach some goals related to the Barbell Bench Press, and instead of getting closer, I was coming further and further away each session because the exercise was tearing my shoulders up, and leaving me in pain.

It’s now been the better part of this year, that I have quit Benching with the Bar, and moved exclusively to Dumbbell Bench Press. And although my numbers were completely embarrassing at first, I now feel like I’m living more in tune with my beliefs.

And, after a couple months, or however long it’s been, I’m starting to see some good increases, feeling better in the shoulders, and I think even seeing a bit of growth.

I LOVE LIFTING, but I think I was coming severely close to having the majority of my training SHUT DOWN due to the pain I was feeling in my shoulders.

I encourage you to do the same as well – by all means train hard – don’t just go through the motions in the gym.

But, if there’s a movement that is tearing you up inside, don’t feel the need to push through pain and suffer because of it.

Remember…It ain’t about how much you lift. It’s about how much you LOVE lifting.

All the best in your training.

-Jedd-

P.S. Along these lines, I want to help you out as much as I can, to get you to your goals. And that means helping you learn to do your goal lifts properly and as safely as possible.

Get Introduction to Strongman Training AND Stone Lifting Fundamentals TOGETHER and SAVE $20! CLICK HERE or click the images below …

Man what an awesome time last week, DIESELS.

As you know, on Thursday, I help the Basics of Grip and Strongmanism seminar.

Here’s a pic, with Dr. Jim Wagner on the left, me, and Chris Fritz on the right.

I got this message posted on my wall on Facebook, after the event:

“I got to spend the day at a seminar with the grip legend himself,
Jedd Johnson. I learned more in 5 hours than I did in the last
five years. It was an awesome day and Jedd is one of the nicest
guys you could meet! I’ll be seeing you again Brother, hopefully
at the next contest!”
Chris Fritz

Here’s how the day’s content rolled out:

9:00AM Start, meet and greet

Warm-up
General to specific
– General Full Body: Mobility / Activation / Light Stretching
– Move to Weights
– Move to Specific
Magic Formula for Success

Grippers
Technique
– Placement
– Gripper Angle
– Wrist Angle
– Tension
– Set to Close
– Skin Stretch
– Hit
– Thumb Strike
– Roll the Dice
High Impact Drills
Other Considerations

Pinching
Technique
Chalking Considerations
Plate Pinching
Block Weights
Odd Objects
Euro Pinch
High Impact Drills

Thick Bar and other Open Hand Training
What is Open Hand Training? Is Thick Bar “Support Grip”
Support Specificity
Technique
High Impact Drills

Intro to Feats
Tension
Beginner Conditioning

Card Tearing

Steel Bending

Programming
Individual Based
Setting up YOUR Program
Formulating Workouts – Think Energy Economy
Specificity of Grip Training

Injury Prevention & Recovery Methods

2:00 / 2:30PM Close

Man, I’ll tell you what, I absolutely love talking GRIP with people.

As an added bonus, before we called it a day, Dr. Jim Wagner got out his Hawk Grips, a special set of soft tissue massaging devices, and worked on us a little bit.

We got EVERYTHING on film, and I’ve already begun editing the footage, and will be making it available on DVD.

If you want to be the first to add this information to your library, add your information to the box below:

It will be ready as absolutely fast as I can get through all 5 hours!

In the meantime, Make it a Great Week.

All the best in your training.

Jedd

P.S. Sign up for notification as soon as this seminar becomes available.

By request of the Diesel Universe, I was asked to hold a 1-Day Intensive Grip Training Seminar.

I have set this up for Thursday, March 31st, starting at 9AM in Wyalusing, PA

We’re covering the 3 main areas of Grip Training: Grippers, Pinching, and Thick Bar.

These are the foundations of developing a Mighty Grip, and you’ve gotta train them right to build your Grip right.

The goal is make sure each person there is setting Grippers correctly, and knows the ins-and-outs of Plate Pinching, Thick Bar Training, and other Open Hand methods.

We’re also gonna get into the basics of Card Tearing and Steel Bending, because these feats make up the foundation of Strongman feats.

There’s going to be a BIG EMPHASIS on hands-on training.

After all, you learn by doing, not by hearing me talk.

This is going to be an AWESOME session for a small group of 5 individuals.

However, there’s already 2 slots filled.

Which means if you want to grab 1 of the 3 available slots, you’ve gotta act fast.

Click Here to Join the Seminar

It’s gonna be a sweet, comfortable and intense 5 hours of learning on March 31st.

Get ready to learn a ton, have a bunch of fun, and get your hands chalky.

All the best in your training.

Jedd

P.S. I’m also looking to set up the cameras to capture everything on film. Gonna be awesome.

Grab Your Spot Now: Click Here to Join the Seminar

There were Superheros all over the place, this past Sunday.

From little kids with their faces painted like the Ninja Turtles, Spider Man, and even characters from Frozen…

To the athletes who participated in the 5K Run/Walk…

To the entertainers who did their thing after the event was complete.

It was a day to celebrate the inspiration we get from one awesome little boy and his family.

Sunday, August 23rd, was the 2nd Annual Mason’s Hope 5k Run/Walk.

And I had the honor to be a part of it for the second year, perform classic oldetime strongman feats of strength.

Above, I’m blowing up a hot water bottle until it bursts…

The whole day of activities is dedicated to Mason Barto, a boy from Towanda, PA, who has CDG (Congenital Disorders of Glycosylation) and it keeps him from living the kind of life most youngsters enjoy.

However, despite the challenges he faces, physically, Mason and his family continue to be bright faces in the community and an inspiration for countless people.

I know that when I came home later on and did my August of Arms workout, thinking of Mason made me focus in and take things a little bit further than my body wanted to.

It truly is my privilege to be a part of this great day each year.

Below, you’ll see the video of the entire show I did, and after I finished up, local singer, Aaron Kelly, who was on season 9 of American Idol, gave a little concert as well.

A great day indeed. I hope you enjoy the videos.

Intro and Warm-up Bend – Bending a Horseshoe

A nod to Pat Povilaitis, “The Human Vise,” and first person I ever saw do this feat.

Bending a 60D with Aaron Kelly in my Arms

A nod to Dennis Rogers, Grandmaster Strongman, who made this feat famous.

Bending a Nail on the Bed of Nails

I invited Mason up to help me out with this one.

Kid Lifting with the Strongman Bench

The kids always have a lot of fun with this one. I got the idea from Strongman John Beatty, who was once on America’s Got Talent and performs strongman shows all over the country.

Breaking a Chain with Arm Strength

I wanted to do something cool involving Arm strength, so I decided to break a chain. Looking back, I wish I would have gone for a double chain break, because the single ended up being too light.

Ripping a Phone Book in Half

This was a Pittsburgh phone book, so I made a couple sports jokes before ripping this book in two.

Bending / Breaking a Hammer

This was a Pittsburgh steel hammer, so I worked the Pittsburgh sports joke in one more time. Somehow, the handle broke on this instead of the neck bending like it usually does, so it didn’t look as good as it usually does.

Bursting a Hot Water Bottle with Lung Power

The hardest challenge of the shoe, I always feel like I might pass out doing this one.

Dousing the Flaming Hammer

This is one of my signature feats, I guess, since I light it on fire and talk about my original interest in becoming a pro wrestler called Napalm Jedd. I also use it to salute Slim “The Hammer-Man” Farman, one of if not THE oldest living performing strongman.

Performing feats of strength is a fun and reward form of training, and I’d love to share my knowledge with you, via any of my various resources. Please check some of them out below and let me know if you have any questions as far as what can be the best fit for you.

       

All the best in your training.

Jedd

To me, the greatest thing about lifting weights is the never ending ways to challenge yourself.

Just when you accomplish one goal, there’s any number of other things you can do to make yourself better.

In the Fall of 2014, I pushed myself to the limit with 20-Rep Squats.

I wanted to see how far I could go.

I started with 225-lbs, and over the course of about 10 weeks, I worked my way to 355-lbs. I only got 16 reps with that, however, as on my last rep I strained a hamstring/groin muscle.

But I had no regrets. Sometimes an injury happens when you’re trying to see what you limits truly are.

After a couple months of rehab, recovery, and rebuilding, I decided I was ready for another round of 20-Rep Squats, only this time i was gonna do it a little different.

Instead, this time, the goal would be to hit 20-reps of Goblet Squats with the Inch Dumbbell.

Here’s my best effort to date in max reps: 13 with the 176-lb Inch Dumbbell on loan from John Eaton:

Goblet Squats are a great exercise. While they are usually used as a precursor to Back Squatting by using lighter weights, they can also be used for heavy training as well. On top of using the Inch Dumbbell for Goblet Squats, I was also using the 200-lb Kettlebell for Goblet Squats for a time this year as well. You can see some videos of that here => 200-lb Kettlebell Goblet Squats.

What’s interesting about Heavy Goblet Squatting, especially with a circus-style dumbbell such as the Inch Dumbbell, is that a part of the bell lies on your stomach.

So, not only is breathing difficult due to the dumbbell being held at chest height, you’ve also got the additional challenge of breathing through the belly against the lower portion of the dumbbell at the same time.

I liken this challenge to performing multiple repetitions of Atlas Stone lifting. The difference is, you never drop the stone to re-grip or load it atop a platform. Instead, it’s like you just keep going from the lap to the chest-load position.

Stone Lifting Technique: The Chest-Load

Above, Steve Slater lifts a stone to the chest-load position. Going from lap to chest-load like this feels VERY similar to Inch Dumbbell Goblet Squats.

It makes for an awesome physical challenge, and that’s what it’s all about, for me, when it comes to strength training.

I’ll keep you updated on the 20-Rep Inch Dumbbell Goblet Squat Saga.

Speaking of the Inch Dumbbell, next week, I will be shooting a DVD on that very subject. If you’re training to lift the Inch Dumbbell, make sure you sign up for updates about it using the form below.

Lift the Inch Dumbbell – Sign up Below:

All the best in your training.

Jedd

Are You Training to Lift the Inch Dumbbell? This DVD Will Help You: