Hello DIESEL’s!

Check out this video of a hardcore Diesel Bending Maniac putting his Diesel threads in ACTION!

This is Carl Donati Jr, and he is putting a serious hurtin’ on an FBBC Golden Bastard with single IMP’s in less than 30 seconds.

Notice the killer Diesel Shirt that Carl is sporting! There’s at least one PR in every shirt, GUARANTEED.

In case you are not familiar with all of the terminology included here, I will explain.

Bastard – 7″ Bar from FBBC. Once bent, you attain the title, Bastard. This bar takes roughly 480=lbs to bend, as measured with the recognized method that was designed (to the best of my knowledge) by Eric Milfeld.

Golden Bastard – 3/8″ Diameter Brass Bastard Bar. Once bent you attain the title Golden Bastard.

IMP’s – Iron Mind Pads (the blue cordura wraps from IronMind Enterprises that must be used for their Red Nail Certification)

Single IMPS’s – This is to show that only one IMP is used per end of the bar. IMP’s are about 12-inches wide and are usually folded in twice before wrapping. Despite this “layering” of these “pads”, they give you very little actual padding – there is still a significant pain factor going on.

As you can see, Carl knocked this out of the park and surely qualified for the certification list at FBBC.

There are actually many, many (MANY) lists that are kept all over the internet for bending, nails, bolts, and various types of steel, stainless, and brass bars, among other things. It’s crazy how much the sport has evolved in the last few years.

Nail Bending isn’t just about wrapping the nail, bar, or bolt with as much padding as possible and bending it. There are many recognized methods, each varying in difficulty, pain tolerance, and other factors.

If you want to get started with Bending like this, then here is how you can do it…

• Nail Bending eBook: The most compelte reference on Bending that exists. Quick easy download for just $39.97
• Nail Bending DVD: Learn the Three Major Techniques with step-by-step video instruction, as well as wrapping demos, Injury prevention, Warm-up and more – Just $59.

Also, to pick up your own Diesel shirt, check out this post: Diesel Crew Tee Shirts. They actually do come with sleeves. Carl’s guns tore threw them in a previous bending PR and they have since vaporized.

All the best in your training,

Jedd

P.S. Get on the Strongman Training DVD Early Bird List. Put your name and email in the box below.

The “Beast In The East” Steel Bending Comp
Promoted by Mike Krahling
Submitted by Mike Rinderle

The Beast in the East Steel Bending Competition will be held this Saturday, May 14th, at 10AM. Some of the best steel benders in the United States will be converging on Exton, PA to compete for hundreds of dollars in cash and prizes.
(more…)

Footage via amuricankb on YouTube

Above, you’ll see Dennis Rogers (who happens to be a Diesel Iron Master) and Pat Povilaitis performing prior to the Mighty Mitts competition at the Arnold Strength Expo from last weekend.

(more…)

Diesel Universe, it’s Time to VOTE!!!!!!

The challenge was to bend a 60D Nail. Who do you think did so in the most improessive fashion? Put your vote in the comments section below!!!

Daniel Reinard – Hanging Upside-Down

Zach Lister – Reppin’ BassPro with Loose Wraps

Darrin Shallman – Uses a G5 as a Warm-up for a Spike

David Wigren – Tiny Pads

Andy Thomas – Wrapped in 3 Paper Towels

Ben Edwards – Various Lifts Leading up to a Bend

Carl Ansara – Pulling a Car, Carrying Kettlebells

Junie Davis – Upside Down with KB in Teeth

So, who is the winner this week? Put your vote in the comments section!

Thanks!

Jedd

Even though I released the Nail Bending DVD over two months ago, the fantastic feedback continues to roll in. I really appreciate the kind words that you have been sending in, and I’d like to share more of it with you.

Get your copy of Nail Bending: How to Melt Steel with Your Bare Hands < = Click That Link

I’m a happy guy Jedd. At 2 different times today I was able to crush the yellow nail. Once at home and then Down at the gym after all the guys yanked on it, and couldn’t move it. So that’s 2 today full crush.

Your Dvd has helped me tons and I get new stuff from it every time I look at it. What a treasure. Thanks again for putting out a awesome product! I’m eyeballing that blue nail, LOL…
Tom Guthrie

I received this awesome DVD at the at the start of the year. Only two weeks in and I already have a growing pile of destroyed nails and a grin from ear to ear. Very informative, clear explanations of techniques from beginning to end with absolutely no confusion. The section on injury prevention and rehab
is worth the asking price alone. If you want to progress quickly and safely with this unique skill this is a great way to start. Thank You!!
Alastair Hart
Enthusiastic Newcomer from the UK

After reading the Bending eBook, I went out and bent a 7″ piece of CRS and a 6″ Piece of CRS! Imagine my disappointment when Ace Hardware didn’t have 60D nails!

I watched the DVD last night. The Technique, and Wrapping sections were priceless. The stretching, recovery, assistance drills, were like the icing on the cake! It’s like you let out ALL THE SECRETS!

I wondered how to wrap the head of the nail. It makes total sense now! More great stuff from Diesel Crew!!!

Marc M. McLellan
Special Investigative Support Technician, Federal Bureau of Prisons

Submit your feedback by leaving a comment below or post it on my wall.