Hello DIESELS!

It’s no mystery that I obviously love Grip Training. I do it every single day I train as long as I am injury free (and sometimes I still do it anyway if I am hurt, I just do something else).

My love for developing Grip Strength spilled into a love for competing at Grip Strength in 2003 and my obsession is showing no sign of slowing down any time soon.

Now, even if you do not love Grip Training yourself, you have to agree that having a strong Grip is an advantage, whether you obsess over grip training like me or not.

Advantages of a Strong Grip

Stronger, Heavier Lifts
With stronger hands and a better grip you can lift more weight in pulling and rowing exercises, you can handle more weight in pushing movements like the bench press, and you can control more weight in lifts the squat. Stronger Hands = Bigger Lifts

Better Endurance / More Reps / Better Progress
You are limited in many case by the number of reps you can perform in an exercise. Imagine how much your progress would grow if you could do more reps in all lifts? One aspect that holds people back is their grip. Their grip fails or slips and they end up losing reps and cutting sets short. This is a bad equation only made worse by using the dreaded 6-letter word STRAPS.

Better Performance in Sports
Many sports depend on having strong hands and wrists: Baseball, Wrestling, Football, Rugby, Tennis – even soccer performance is increased by having strong thumbs for passing the ball back into play. With weak hands, you take a back seat to others on the court, field and mat.

Stronger Resiliency Against Injuries
If you do consistent work for the hands, wrists and forearms you build up strength and become resilient against injuries. You can take more bumps at a high intensity level and continue to play at a high level. If an injury does take place, the stronger athletes bounces back quicker. Unfortunately, the thumb is often neglected, which results in the incapacity to return to play which is something I will be covering later on this week.

These are just a handful of the benefits from having a Strong Grip, but I have found in my recent travels that some people are confused about what it takes to develop a strong grip.

Grip Training Myths

I believe in Bigfoot, but not in the following myths…

Grip Training Myth #1 – You Need a Ton of Grippers

First off, you do not need two dozen grippers in order to develop a strong grip. Having a bunch of them is a hell of a lot of fun if you want to have the ability to make small jumps in gripper strength increases, and it is a must if you plan to compete (unless you have the Vulcan Gripper), but if you are looking to just build massive grip strength for the advantages listed above, a couple of Grippers will do you just fine.

Grip Training Myth #2 – You Need a Huge Variety of Griplements

Next, you do not need a bunch of Griplements (specialized Grip Training Implements) to build a strong grip. Even though I have more Griplements than you can shake a stick at, and continue to look for opportunities to buy and build grip training equipment to expand my collection, you can by with a just a handful for variety.

Grip Training Myth #3 – Grip Training Takes a Lot of Time

Finally, you don’t even have to add time to your workout in order to develop a monster grip. You can simply replace some of the things you are already doing with more grip-intensive pieces of equipment.

And that is what I want to show you today – How to Implement Grip Training without Adding Extra Time to Your Workout. In order to do this, we will use a couple of simple Grip Training Concepts…

Grip Training Concepts

Grip Training Concept #1 – Evolution of the Movement

One of the principles in the Diesel Method is to go beyond the normal limitations of a movement and evolve it into something more challenging in order to increase the demands and as a result make you stronger and a better athlete.

There are many ways to do this, but one such way in order to bring about a more Grip Strength intensive training effect is by modifying the equipment used.

In the example below, instead of using normal equipment such as Powerlifting and Olympic bars, we will use Sandbags and Axles, which require a much more open-handed position and make the lifts more difficult to perform and more demanding on the hands, thus increasing Grip Strength.

Grip Training Concept #2 – Integration

Integration means that instead of just working the Grip in isolation, such as with Grippers or by pinching Block Weights to develop grip strength, we will be working much of the body all at the same time with the hands still being targeted heavily.

One way to accomplish Grip Training Integration inexpensively and effectively is with a Sandbag.

Benefits of Sandbag Training

The Sandbag is an excellent piece of training equipment. Specific models are sold on-line, such as the Ultimate Sandbag (you can get one here through my link: Ultimate Sandbags), or you can make your own sandbag from a duffel bag like I did years ago.

Aside from being versatile (sandbags last a long time), they also enable you to train with speed and explosion, and they work the grip.

• Speed and Explosion – You can throw Sandbags around without mercy. This enables you to develop serious power and strength. Performing Cleans and shouldering movements with the sandbag also trains triple extension, a powerful movement pattern involving the ankles, knees and hips, which is found in many sports and is often trained with the Olympic lifts.
• Grip Strength – Depending on where you grip the sandbag, you can bring about different levels of Grip and Forearm Strength. For instance if you grip it with an open hand like a bear hug or monkey grip, you will work your fingers, thumbs, wrists and forearms all the way up to the elbow. This is the best way to go about it for the Grip Training effect. You can grip the handles if you wnt to, but in my estimation, that takes a lot away from the benefits of the lift.
• Metabolic Effects – Because Sandbag Training involves so much musculature you ended up torching a lot of calories and hitting your conditioning as well. Since it is so much fun, you don’t mind breathing so hard you burn your throat or the aching of the glutes because you know you are throwing around serious weight like it is a rag doll.

Benefits of Axle Training

The Axle is really nothing more than a long thick bar. Axles are sold at many on-line locations. The prices can be scary at first, often in the hundreds of dollars, but they come specialized with collar fittings and sometimes knurling. These additional features make them more expensive.

You can actually make your own out of just a pipe and it will get the job done. Joe Hashey and I show everyone how to make the most awesome Axle ever known to man in our Home Made Strength DVD as well.

What’s great about Axles is the fact that anything you can do with a barbell you can do with an Axle, you just can’t do as much weight or as many reps because the thicker grip tests your hand strength more.

Implementing Grip with Little Special Equipment and Zero Extra Time

One of the things I have been doing more of lately is back-to-back sets of lifts. It allows me to get more work done in a shorter period of time so I can spend more time working on Grip.

I told you I was obsessed.

Below is a video clip where I perform Sandbag Shouldering with Bent Over Axle Rows in a back-to-back fashion.

For this set, I performed 4 shoulders to each side followed by 8 reps in the Bent Over Row. The set itself is not that long, but the cardio demands far exceed normal set, plus you get the benefit of direct grip strength and forearm work while working the rest of the body as well.

If you are wondering about the rest of the workout, this combination was actually Part II. Part I was Pull-ups and Pull-aparts and Part III was Side Rows and Face Pulls. I would have liked to have done Deadlifts first or at least somewhere in the workout, but testing for it wasn’t going well, so I switched on the fly.

I also did a bunch of Thick Bar Work after all of this and got several good singles in the Double Inch Dumbbell Deadlift, which i got on video but have not edited yet. Hopefully I can get to that soon.

I hope this article has been helpful in pointing you in some directions you can in order to implement grip strength training. A lot of the information out there leads one to believe you have to all this stuff with a bunch of excess equipment and spend a lot of time doing it in order to develop a grip that would scare the likes of Fritz Von Erich, but that just isn’t the case.

If you have any questions, please let me know by leaving a comment below.

All the best in your training,

Jedd

For this week, the Feat in the Classic Strongman Feats Tournament is
Phone Book Tearing.

Here’s a summary of how the contest will run and how to perform the feat:

Need more info? Here you go…

Here are the rules for this week’s challenge.

First off, there is to be absolutely NO POPPING used. The Tear MUST BE DONE using the widely recognized legitimate means of phone book tearing called the Grip and Rip method, popularized by Dennis Rogers.

Second, the objective is to tear the phone book lengthwise, and for the most part parallel with the spine of the book. The angle of the tear may in fact change move toward or away from the spine, but the objective should be to go from the top of the book and end at the bottom of the book.

Third, bracing is permitted, as this is often done by even many of the best performing strongmen today, and I would imagine most of the Classic Strongmen of the past as well. However, this must be done in a manner that remains in the spirit of the feat.

How the Event will be Scored

The primary way this challenge will be scored is by a page count of the book. A clear shot of the pages should be taken on video of each section of the book, in order to get a solid count. For instance, many books have a white pages section, yellow pages section, and often a blue (governmental) pages section. All of these pages can be counted and added together in order to get the highest count possible. The total will be used as the base count.

Page counts will be rounded down into groups every 100 pages. So if the total comes to 1256 pages, then the book will be considered a 1200-pg book. To be considered a 1300-page book, it must have at least 1300 pages. If only one tear is put through the book, then 1600 beats 1500, beats 1400, etc.

Aside from the page count, the number of lengthwise tears will be the next factor. Multiple tears can be executed on the book, as long as they are fully completed from the top of the book to the bottom of the book. Cornering and notching the book will not count toward a store.

For instance, if two people tear a 1500-page book, and one person tears two slits the entire way through the book, then the person who tears the two slits will beat out the other person who only tears one slit.

However, since page count will be the primary factor, meaning if someone tears a book that is 1800-pages in half and another person tears a 1200-page book twice, the person who tore the bigger book wins.

Because multiple tears might be attempted, time will not be a factor, just as it has not been a factor in past weeks, so if you think you may be able to tear your book into multiple slices, then go for it, because whether you finish it in one minute or ten minutes, the time does not get factored in.

If you are unsure how to tear phone books or if multiple slits is something you have not tried before, check out my phone book tearing ebook, Phone Book Mass Destruction, by clicking on the image below.

All the best and I look forward to your submissions!

Jedd

Hello DIESELS!

I am writing a quick post because I have been working with David Horne, Grip Legend, on a project recently and it is all coming together, now!

I will be having a load of Vulcan Grippers sent to me next week!

If you are not familiar with the Vulcan Gripper, I will give you some information on it.

The Vulcan Gripper was designed by David Horne. It is a fully adjustable Gripper that can be set at strength levels ranging from around a Trainer / Number 1 Gripper from IronMind to way up above a #4.

There are a few adjustable grippers on the market, but this one is the preferred one by most serious Grip Strength practitioners because it replicates the force curve of a torsion spring gripper very well.

The Vulcan with a Torsion gripper on top – the handles match almost perfectly

For instance, the Ivanko Super Gripper and ViseGrip Gripper are adjustable, but their force curve does not match up to a torsion spring gripper. The Vulcan actually matches up very well.

There is another aspect of the Vulcan that I like in particular. The handles do not have any knurling. Because of this, you can do a LOT more volume in your training with it because your skin does not get pummeled by the knurling that is on most torsion spring gripper handles.

I was speaking with Paul Knight one time. Paul is a guy with one of the best Crushes in Grip Sport, and he said that the lack of knurling on the Vulcan actually made his knurled handle Gripper strength even better, and it makes perfect sense. Even with the lack of knurling, you still can get a good bite on the Vulcan handles, but when you go back to torsion grippers, you get even better bite!

The other advantage of the Vulcan, and this is perhaps the most important, is that you won’t need to buy so many Grippers in order to train a wide spectrum of strength levels. That can get pretty expensive, especially if you buy them one at a time. With shipping most grippers are about $30 apiece, so four of them bought separately is $120.

The Vulcan cost only $97, a substantial savings.

The Vulcans are being shipped to me next week. You can pre-order yours right now.

If you order by 8/6/11, you will get a free video showing how to train with the Vulcan Gripper for Complete Crush Grip Domination. This video will show you everything you need to know about adjusting the spring, getting a good set, progressing in crush strength, and how to set up your own program.

The Vulcan Gripper is also the gripper that is used in the World’s Strongest Hands Series, which starts up on August 13. With this contest becoming an annual endeavor, the Vulcan could potentially come a staple in many more competitions down the line.

The new Vulcan Gripper, the V2

The Vulcans that are coming are the new design, the V2, so if you are a Gripper Collector and already have a V1, you can add this one to your collection.

If you are wondering about whether the two versions function differently, they do not. The new Vulcan is simply laser-cut, so the look is a lot cleaner, but they both have the same smooth action and powder coat.

In fact, the V2′s are being used in the World’s Strongest Hands Series this year, along with the V1′s, so if you want to get in on the action, here is your chance!

All the best in your training.

Jedd

P.S. If you need a lighter Spring, I have a small quantity of Orange Springs that are lighter than the standard issue Silver and Black spring. These are $19.99 plus shipping.

Hello DIESELS!

When I left off the last time, in Part I of the Sorinex Series, I had just told you about how Andrew Durniat and Tex Henderson battled in the Rolling Thunder Pull-up Challenge and how Chad Woodall worked his ass off to pinch two Old Style York 45′s in each hand, and came so friggin’ close!

Well, my friends, as they say, you ain’t seen nothin’ yet.

Next up on the docket was Rich Williams. On this day in history, Rich Williams would be attempting to Clean and Press the Inch Dumbbell.

Just in case you are not familiar with the Inch Dumbbell, let me give you a quick run-down.

The Inch Dumbbell Replica – 172lbs, 2 and 3/8 inch Handle

The Inch Dumbbell is named after the traveling strongman from the late 1800′s who used to take it around to circuses and expo’s and challenge people to lift it – his name was Thomas Inch. The original Inch Dumbbell is owned by Kim Wood, and at some point both Sorinex and IronMind got molds made and sold replicas up until about 2004 or 2005.

The Inch DB has a 2 and 3/8 inch handle that is roughly 4 or 5 inches long and has large globe heads. This is a solid dumbbell weighing in the neighborhood of 172-lbs, and because it is cast iron and one solid piece, once you try to lift it, the globes start to turn and rip your thumb away and pry your fingers open at the same time.

Deadlifting the Inch Dumbbell is a World Class feat. To walk with one or even Two is out of this world and to clean and press it is damn near godly.

Let me show you what it looks like to clean and press the Inch Dumbbell, Rich Williams style…

As Richard Sorin states at the beginning of the clip, the Inch Dumbbell in this video has only been cleaned and pressed one other time and that was done by the WWE’s Mark Henry in 2002. Other Inch Dumbbells have been clean and pressed in the past, but the people that have done it can all be counted on one hand.

Now, once that was over, plenty of other people tried giving the Inch Dumbbell a ride.

Below, a serious Highland Games Competitor goes for a continental of the Inch Dumbbell. He doesn’t get it, but I am pretty sure he has gotten it in the past, I just can’t recall his name.

I did not bother trying to continental the Inch, but instead, I tried deadlifting it and the original Blob at the same time. As you’ll see, I miss pretty badly on the Inch…

…and then Andrew Durniat came up and hit it pretty easy. Before doing so, he talks about the different disciplines in Grip Sport and how strengths and weaknesses come into play.

Now, it was time to give the baby Inches a try. Both of these lighter Inch Replicas weigh in the neighborhood of 139. They were some of the original replicas that were cast and they did not come out quite right, so Richard just held onto them.

Again, I tried deadlifting the 172 Inch in one hand and one of the baby Inches in the other. Unfortunately, that didn’t go so well either, but instead of just stopping and setting the lighter Inch Dumbbell down, I kept my grip on it, walked it over to the other baby inch, picked the second one up and did a Slow Motion Irish Jig.

Now, something to point out. Sorinex also has a 150-something baby Inch, but I did not try it. I wish I had and here’s why…

I can control the 139 baby Inch like Andrew can control the actual 172 Inch. So does that essentially mean that he can out thick bar me by 30-lbs? If so, how much must Rich out thick bar me by if he is cleaning the Inch dumbbell? 60-lbs? 100-lbs?

Scary thoughts. I really wish i would have tried the 150-something Baby Inch.

More Baby Inch Mayhem

In this next video, a Pro Strongman from the area jumps up and does a continental and several presses. Again, sorry, but I did not catch his name. I then gave it a shot and cleaned it to my shoulder pretty easy and then got three push jerks. These guys are freakin’ monsters for being able to press these things with no leg drive. AWESOME!

Again, Rich came up and showed us how it is done, cleaning it with ease and then pressing it for 20+ like it was his job.

Andrew also tried to snatch the damn thing, but it proved to be just a bit beyond him. Some day it WILL happen.

OK DIESELS, that’s it for Part II. In Part III, we are going to break away from the Inch stuff and get some serious BLOB-bery going…

Hasta la proxima, all the best in your training.

Jedd

Hello DIESELS!

I want to sit down for a while and start telling you about my fantastic trip to Sorinex two weekends ago.

Richard Sorin, owner of Sorinex and innovator of the Blob (left) and Me (right)

Before I get into that, let me just tell you that if you EVER get the chance to go to Sorinex, do it. Their place rocks. Not only will you get to try some of the most outstanding grip equipment in the world, but they also have a completely fully functional training area for the rest of your body as well. Awesome.

With that, I also suggest that if you ever get invited anywhere for a strength training get-together, DO IT. The environment at these things is just plain awesome. Guys (or gals) pushing one another to try new things, cheering each other on, increasing the volume demands of the lower arms, all of this stuff can bring about PR’s. And once you get one or two PR’s, you really start getting momentum, confidence, and adrenaline which can lead to even more PR’s.

So, the weekend started for me by flying down to South Carolina, where Bert Sorin picked me up at the airport. I got into his giant SUV, I forget what it was, but it was beautiful, and I got to meet Nick Tumminello, a fantastic trainer, fitness coach, and strength coach from Baltimore.

My new buddy Nick wearing my Diesel shirt (photo: Nick Tumminelo)

Nick trains a great variety of clientele and his knowledge is fantastic. I also got to meet his good friend Benji, who came into town with his collection of cameras. Nick and Bert shot a DVD on Sunday on training with the Landmine. Benji does all of the video work for Nick, which must be awesome, because I do all that stuff on my own.

Me, Nick Tumminello, and Bert Sorin

On Friday night, I got ready for the next day’s activities by eating nearly two dozen buffalo wings at a place called Carolina Wings. I figured a place like that must make good wings, so I ordered them and they pulled through. Really good stuff!

Bert took me back to the hotel and dropped me off and I did a few hours of work on the laptop before turning in for the night.

In the morning, I met Nick and Benji in the hotel lobby and we walked across the driveway to Cracker Barrel. This is a damn good restaurant to get breakfast made the old fashioned way, but make sure you go early. We were there before 7 so we got in there easily. I tried to do the same thing the next day around noon with a hangover and I had to wait about 30 minutes though. I’m getting ahead of myself now…

So after breakfast, Bert came and got us and we went to the Sorinex facility. To give you a bit better idea of this facility, it is more than just a weight room. By rights, it is actually a showroom. All of the equipment is gorgeous. No paint is scratched off, there’s no sweat or spit on the floor like most gyms, and it smells like a normal gym, not an arm pit. BUT even with all its beauty, it is still fully functional and you can use all of it when you visit. It is great.

I didn’t really know what to expect at Summer Strong #4. I thought it was just a day of training, but actually they have like a full day of events planned, which was cool.

The first thing on the agenda was a gentleman named Coach Shrock who presented on speed development. He put this early 20′s kid through a workout that involved about a week’s worth of volume. The drills were awesome and I have stolen a couple for the guys I work with. The kid doing the demo’s took it all in stride (get it?) though and just kept on going.

After the speed training seminar, it was time for Andrew Durniat to do his section on Density Training. I thought he was going to talk about his kettlebell sport, but actually he talked about the stuff he does with his trainees at his facility. This is based on Charles Staley’s Escalating Density Training. He says it works out great for his trainees, and they rarely miss a workout because they are always so intense and also concise. If the client only has 20 minutes to train, it is no problem because they set up an EDT frame and get it done.

If you are wondering about the layout of these EDT blocks, Andrew says they usually pair up antagonsitic movement patterns, such as Pull-ups and Dips, and they go for a certain amount of time…Pull-ups then Dips, Pull-ups then Dips. I believe he said it is done in sets of 5 reps for each movement and they do about ten sets, but I could be slightly off on that. I took notes, but I lost my sheet along with about 20 email addresses I collected.

Once Andrew finished, it was time for an open lift. What went on is all of the people there just started training. It was awesome. I got in some foam roller work because I was still really badly locked up from the plane ride the day before. I pretty much did foam rolling, activation movements and stretching for an hour straight and I felt amazing.

After the open lift, it was lunch time. The day was moving pretty quickly. For lunch, they cooked a gigantic stew in a stainless steel barrel. The stew was a mixture of sausage, rice, eggs, and I believe pork lard. It tasted fantastic. I overhead one of the main cooks, who goes by the name Breeze, and who I believe used to be competitive Olympic weightlifter in the early 80′s talk about the importance of cholesterol in testosterone production. I didn’t catch it all, but what I did catch seemed to be logical.

Once lunch was over, there was a presentation Olympic lifting. The guys that did this presentation were Don McAllie and Glenn Pendlay. Don has a book called Power Up.

I was really into this presentation. Oly lifting was a major interest of mine when I first got into strength training. What got my attention right away was that these guys said that many Oly Strength Coaches these days teach the lifts wrong. They said that before listening to an Oly coach, you should ask them what they have done and who they have coached.

What it sounded like they were saying was that there are some coaches out there that make these claims to be these awesome Oly coaches, yet have done nothing themselves in competition and also have never coached anyone who has done anything in competition. I don’t have a lot of trouble believing this because that kind of stuff happens in every sport and in every profession. However, I do not know exactly who they were talking about.

Along the lines of doing the lifts wrong, I do remember three points they made. One was that at no time during the Oly lifts should you jump. I thought this was fairly obvious. I am not sure why anyone would want to leave the ground during one of the Olympic lifts. However, these next two points were pretty shocking to me.

They said that they do not teach triple extension during the lift. Now that was kind of a shock to me. Triple extension is the systematic firing of the hips, knees and ankles in extension in order to generate power into the bar, such as on the pulls and on the jerk.

The other thing that struck me as a surprise for them to say, but actually made perfect sense to me is that they do not teach a high pull, as in pulling the bar up high near the sternum when training for the Olympic Clean. Instead, you are using your traps and upper back to pull yourself under the bar. However, the high pull is a common derivative movement that is used to train for the Olympic lifts. This was a very interesting point.

I would have stayed and listened to the entire presentation, but we, the Grip Guys, were up next and Bert rounded us all up. He and his father, Richard Sorin, originator of the Blob, appointed me MC for the Grip segment.

When it was our turn, Bert introduced me and I walked the crowd through an explanation of what Grip is and how it can benefit you, as well as a little bit on Grip Feats and Grip Sport. After this, I ran down the list of events that would be going on.

I told them that first we would have a Pull-up contest between Tex Henderson and Andrew Durniat. Tex weighs 340+ lbs and Andrew weighs about 230, so Andrew was going to do is while hanging an additional 135-lbs from his waist, just to make things fair. In addition, to make this even more challenging for both guys, the pull-ups were done from Rolling Thunder handles.

Check out the video below…

Andrew Durniat vs Tex Henderson

Can anyone reading this do pull-ups with 135-lbs hanging from their waist?

Next up was Chad Woodall. Chad would be trying to pinch Two 45′s in each hand. Pinching two 45′s in one hand is an ELITE feat of Grip Strength in itself. Pinching Two 45′s in each hand at the same time is something I have only seen once or twice in my life. To make all of this even more challenging, Chad would be trying to pinch two old-style YORK 45′s. Old York plates are roughly twice the size of most 45-lb plates manufactured these days, so this feat is EXTRAORDINARILY DIFFICULT. Check out this video below…

Chad Woodall Attempting Two 45′s Pinch with Old York Plates

Again, this is unbelievably HARD!

If you can not watch the entire video, here is Chad coming damn close

Chad will soon get this feat. It is just a matter of time.

In case your wondering, he also was able to fully deadlift two of these old Yorks in each hand separately. It as awesome to watch. Check out the video around the 4:20 mark…

Feats of strength that were once thought impossible are being performed on a regular basis now. It may only be a matter of time until we are doing Farmer’s Walks with two old York 45′s in each hand. Don’t EVER look at the videos and think that these feats are something you won’t be able to do. You might not be able to now, but down the line, who knows…

I’ve got tons more videos coming your way. Make sure to check back here tomorrow, or sign up for my newsletter, below, and I will hit you with an email when Summer Strong #4 Part II gets posted!

All the best in your training.

Jedd

P.S. Couple other pics for you…

Me and Kevin Kamphouse from Sorinex

Me with Rich Williams