Dennis Rogers stops a 100-horsepower Harley Davidson Motorcycle with his Grip on Stan Lee’s Super Humans Show

This week, I have a brand new Diesel Iron Master Nomination to pass along – Dennis Rogers.

This nomination came in from one of the visitors to our site and RKC-certified Kettlebell Instructor, Eric Moss.

If you have never heard of Dennis, just read the note I got from Eric below, and you will understand how impressive, inspiring, and awesome Dennis Rogers is!
(more…)

Hello everybody. Today, I am covering an Iron Master nomination that I put in myself.

This one is for Richard Sorin, owner of Sorinex (Sorinex.com), and famed Grip Strength Legend who innovated The Blob and became the first person to close the #3 Gripper.

Iron Master – Richard Sorin

I first heard of Richard Sorin in 2002 when I first learned about Grip Training.

I quickly found out that essentially the name Sorin and the term Grip Strength were synonymous.

While not the first to train for Grip Strength, Richard has been cited by John Brookfield and many others as a pioneer in the focused development of World Class Grip Strength.

As you’ll see, Richard has been messing around with odd objects and Grip Training challenge pieces for decades!

Richard Sorin, Anvil Lifting

I salute Richard Sorin for many reasons. No doubt, Richard’s interest in Grip Strength is one of the primary reasons I train for Grip Strength, and plan to do so for decades to come as well.

But also Richard has had a bigger effect on me. Richard inspired me a few years ago to always continue to train hard regardless of what challenges I have going on in my life.

This is because Richard is indeed a Cancer survivor and shortly after battling the disease he was right back to training doing unbelievable feats, including pulling large vehicles with the strength of his neck, using a head harness, shown below.

- – - – - – - – - – - – - – - – - – - – - – - –

I asked Richard to write a few words about how he got started in strength training, and I figured that he would say something like High School or College Sports got him into training, but in reality it started out far, far, far before that. Check this out…

My mind spins trying to say where it all started… I loved strength from my earliest times. I hauled my Billard Jr. Champmaker Barbell into show and tell in 5 year old kindergarten (my most prized posession at that time).


Years went by with my backyard gyms, a huge cellar gym with full size platforms at “The Cedar St. Boys” and monthly trips to compete in Olympic weightlifting contests in New York City at Lost Battalion Hall.



I represented the Keasby Eagles lifting club along with famed Olympian Phil Grippaldi. Trips to York starting at age 13, the York picnics, Saturday training at the York gym, eating with the “greats” at the York diner all moulded me.

Richard on his college years and further exploration of the world of strength training…

Later, when strong enough to acquire a scholarship at U of South Carolina I competed in track, throwing the discus and shotput. I was only 215 bodyweight but summer spent at home during the college years at the Elizabeth YMCA gave me the power and drive to do well.


Power rack training started in its early development with my training partner Anthony Dittillo and Dezo Ban, my Hungarian mentor, and we grew strong. Track was a passion but lifting was my love and rarely did (at least in my mind) the two overlap. I had mechanical skills and wherever I went, school, teaching, coaching, whatever, I always tried to build the better mousetrap as far as exercise and strength equipment was concerned.



My teaching years ended in the realization there was more for me to do. I started my business and though my offerings were heavy, black, and ugly all said “it lasts forever.” That was 30 years ago and still now at 60 my thirst and love of iron persists.

Richard on why he remains involved in Grip and other sporting endeavors…

I feel as part of giving back to so many that took their time to inspire and help me, (I try) to help with events that bring new blood into the sport: Our yearly Summer Strong Day of Strength, our open door, open house daily policy, being involved in creating the events and equipment at the Arnold’s Classic Strongman and now “Mighty Mitts” has brought my life full circle.

I asked Richard what he felt were some of his greatest accomplishments in Grip and the World of Strength…

My greatest accomplishments were in part touched by the “impossible” strength rooms designed and built for colleges and pro teams that won State, National championships, Superbowls and through a bit of what I did became stronger men.


Richard's son, Bert, as a young lifter

My greatest accomplishment is taking the gifts God gave me and having the opportunity to do something with them in the presence of the joy of my life my son Bert. A father always wants his child to be more than he was…I have my wish answered in him.

I asked Richard what some of his numbers are and what his training routine involves these days, and here is what he said…

I still lift 3-4 days per week and don’t understand what taking an easy workout is. My overall strength for a skinny guy was good in my earlier years with a 290 snatch 714 deadlift, and 675 squat, cheat curl 238X10 etc.


Pinching a Monster Block Weight

My real strength, whether I realized it or not, was in my hands. I always toyed with my grip but in the late 80′s I began doing bouts of grip work where some personal bests rivaled the top recorded efforts. I tried to vary my training and devised tools of grip to test and build my strength in the three aspects that grip strength is measured (crush, pinch, support).


Lifting the Blob

I took a simple chunk of pesky broken York dumbbell and after mastering lifting it, it slowly became a world standard for grip manhood “the Blob.”


The First to Close the #3

I was in the early years of spring gripper interest and again lucky to set a world standard level by being the first to close a #3 Ironmind gripper, a feat that I was proud to repeat officially 17 years later at age 58.



Richard Re-Certifies on the #3

Note from Jedd: Richard has been one of a very few who has actually re-certified on the #3 after the rule change was implemented in 2005, mandating the use of a credit card to establish legal set depth…)



Closing the #3 Gripper with 2 Fingers

My strongest feats seem like they all revolved around my strength in my first two fingers,

• Deadlifts of 552 on a 1″ bar
• 530 on a 2″ bar
• 675 lockout
• and a #3 gripper close

These were all done with just those two fingers of each hand.

My supporting power was also good with a non strap assisted lockout with 1331lbs. If anything good came of this hard work was to see the interest in Grip grow a hundredfold and still be able in my own way to help things along.

I can’t say life has been easy but the guiding light of strength has sustained and has given me memories that indeed has given me a “wealthy soul”.

Your friend in strength,

Richard Sorin

It’s been my pleasure to feature Richard Sorin this week in the Diesel Iron Masters. Now check out some of the other pics that were sent over by Kevin and Jeff at Sorinex who helped me out with this recognition.

John Brookfield & Richard Sorin

Richard Sorin & Bill Kazmaier

If you would like to nominate someone for Iron Masters, please contact me at my email address. Put “Iron Masters Nomination” in the subject. From there, include the name of the recipient along with the information you’d like to provide.

Remember, the person needs to be at least 40 years old, they have to be an avid strength trainer, and they have to have had a profound effect on you, inspired you, or in some other way motivated you to train in order to follow in their foot-steps. They HAVE to be a GOOD EXAMPLE.

You can NOT nominate yourself, however…

To give you an idea of other Diesel Iron Master recipients, check out the links below:

• Iron Master Bruce Eckrote
• Iron Master LTC Nathan Acree
• Iron Master Graham Bartholomew

I look forward to receiving your nominations. Thanks and all the best in your training.

Jedd

Get Certified on the #3 = > The Grip Authority

Start Melting Steel = > Nail Bending DVD

Christmas Grip Shirt = > Merry Gripmas

I have an awesome story to share with everybody in the Diesel Universe.

So, my driver’s license is going to expire on like December 4th, and every time this happens I wait too long and usually my license expires and I drive around illegal for a couple weeks before I finally go to the DMV and get it updated.

I decided that I would make this year different and went today to get it done, roughly 6 weeks before it expired. It was about 10:00 AM when I left.

So, I get in my car and my GPS is in there, so I figured I’d see what the truly shortest route is to the DMV from my house. I live in the countryside of Pennsylvania, and there are lots of back-roads I am not aware of, and it is always nice to know multiple routes, so I followed the GPS lead and got there about 10:30AM, because I had to follow a bunch of Natural Gas trucks through the mountains.

I get out of my Exploder and look at my license card and I see that it says I have Hazel eyes. “That’s not right,” I say to myself. So when I go inside and walk up to the desk, I point it out to the attendant, and she tells me to take a number. Five seconds into what would be a 45-minute wait, I realize that I have made a serious tactical error, so I pull out my Blackberry and proceed to get a new Personal Record in Word Mole…I rake at Word Mole.

Finally, it is my turn to go back and get my card corrected and I finally get my picture taken. I was becoming very frustrated with the delay that was building in this whole process, but when I saw how great my new license card came out, “relief washes over me in an awesome wave.”

So, I get in my car a little after 11 AM and I begin to realize how extremely hungry I am. It then pops into my mind that I will have to drive past the Chinese place in order to get home, and with it being lunch time, the price is cheaper, so I head that way to get my eat on.

When I get there, the place is packed and I lose interest in seating down to put my feedbag on, so instead I grab a carry-out container, load it with the Greatest Hits, pay for it, and head out.

Now, what happens next is the most important part, so please don’t hate me for dragging you through all this.

Before I get to that part, keep in mind that until this point, I have done roughly a half dozen things that I did not need to do. I did what I felt like doing, or what I felt would be good. I wasn’t going by a routine or a schedule. I was just going with the flow.

When I get to the door, there are at least ten people there wanting to come in, so I hold the door open for them. As I hold the door I look out to my car at how bad the back of it sags from carrying around Inch Dumbbells and Blobs, and other grip equipment all over the countryside for the first couple of years I owned it, and as I am looking, I see this huge figure cross between my eyes and my Exploder.

“Man that dude is a big son of a gun,” I thought to myself.

I looked again, and to my surprise, the gigantic figure that was blocking my view to my car was none other than Phil Pfister.

If you don’t know who Phil Pfister is, I will tell you. Phil Pfister won the World’s Strongest Man championship in 2006, becoming the first American to do so since 1982. At 6 feet, 6 inches and around 350lbs, the guy casts a pretty substantial shadow.

So, I stand there holding the door and introduce myself and it turns out he is in town for the night having just done a speaking engagement at the high school I attended as a teenager. “You need a place to train tonight, brother,” I say. “You should come over to my place tonight. I’ve got everything.”

“How’s 4 PM sound,” says Phil. “It sounds great!” Phil takes my number and I rush home to straighten up my garage a bit for the workout.

So, I meet Phil about 4 PM and he follows me to my house and we train for about 2.5 hours.

I show him around my gym, and he falls in love with my Stronger Grip equipment, especially the Stronger Grip Club and Mace, so we take them along with my Demolition Club out to the concrete pad in my yard and get warmed up with it. I PR’d on the Demolition Club, getting two sets of two gama casts – Awesome.

Then we move on to Tire Flips. Phil was just getting warmed up still and hit a couple doubles on the tire with ease. I did a few singles. It’s cold out, so we go back into the garage for some log press.

We manage to hold off for about an hour, and then the Grip Feat onslaught takes place. Here’s a run-down of everything we tried…

Two Hands Pinch: Phil gets roughly 230lbs on it, which puts him near the top 10 in the world first time touching it. I’m fairly certain with an additional 10-mil insert in there he could add another 20lbs if not more. I have two cut up thumbs, but was able to get 243 roughly 6 inches off the floor and controlled it on the way down.

Wrist Developer: This thing is a serious bastard to work with. I think the first time I worked on it I got level 4 or something like that. Phil proceeds to hit Level 3, 4, 5, and 6 with ease. He takes two tries to get Level 7. I work up to either a good attempt at 8 or it was damn close. I know it felt like I had solid contact, but I couldn’t hear it click and it was shaking so bad I couldn’t see it. That matches my best ever. I did not try level 9.

Blobs: Phil deadlifted it with ease the hard way and then made it look even easier the easy way. He wasn’t able to lift it by the face, but that is a very hard way to lift it the first time you try, even with hands the size of Phil’s. I got it by the face pretty easy, as I have most recently been training to lift the Fatboy Blob by the face, which is much harder.

Anvils: I have two anvils here right now. One is the standard 55lb anvil and the other is a big gruesome 120lber on loan from Rick Walker. We started out with the big 120, trying to pinch lift it by the top. In all the months I have been training to do this, I have managed to break it off the floor only once and it was roughly one inch. I hit hard with some good chalk and managed to pop it off the floor on my first try. Phil then proceeded to air lift it at least 6 inches off the floor. I let out this big scream because I thought he was going to deadlift it. I then get it about 4 inches off the floor for a nice partial PR.

Vertical Bar: We set up the 2″ Vertical Bar and worked up to a max lift. Phil gets 280lbs with one of his hands and misses with the other. I was able to get 260lbs. This was pretty late in the game. I think he can probably get 300lbs fresh.

Rolling Thunder: I set a new PR on the new handle, with a lift of 190lbs with each hand. 200lbs was welded to the floor. I forget what Phil got with the new handle, but he got about 230 with the old handle. By this point his grip was completely wasted.

All told, I hit like 6 PR’s and had a very memorable workout with one of the most famous strongman competitors in United States History. It was an incredible experience.

And none of it would have happened if I hadn’t decided to hold the door for those people, or get Chinese, or take a new route to the DMV, or decided to even get my license card updated today.

What does this all mean?

Don’t be bound to a schedule all the time. Have a plan but don’t be a slave to it.

Do something different for a change. Expand your boundaries. Continue to stretch yourself with your life, your training, your relationships, and who knows what come about from it.

I had the best training session I’ve had since August, because I looked down in my center console and saw my GPS laying there…

Here’s a couple pictures I got with Phil after the session was over.

Here, you can see that Phil is saying I am number 1,
as in the #1 best story teller in Northeastern Pennsylvania.

Phil shows off his monster Pinky Pad
while I try to pry his big meaty hand off of mine.

We compare thumbs. I think I’ve got him by a bit. What do you guys think?

All kidding aside, I had a great time tonight. It was awesome having Phil push me and I fed off his intensity for some solid PR’s. I really need a full-time partner.

Phil, you’re invited back anytime, brother.

All the best in your training.

Jedd

Hard to believe another year has gone by and the Annual Juniata Strength Clinic is in the books. It’s always great to see the other regulars. I have become extremely good friends with many of them and look forward to going every year.

Before I get going too far into this, I first want to thank Coach Doug Smith, the Juniata Strength Coach and organizer of the yearly clinic. This is the most cost-effective clinic I know of for the number of CEU’s that are available, and it is my pleasure to present or conduct a hands-on presentation each year.

Unfortunately, I was only able to attend on day of the clinic this year, as my fiancee got pretty darn sick on Friday night. I drove home to take care of her and missed Saturday’s agenda. However, I attended many presentations and hands-on sessions on Friday and I want to go over them here and share with you all some of the highlights the presenters shared.

(more…)

Double Overhand Bending

I’ve done a great deal of steel bending in my time. I’ve bent nails, bolts, steel stock, horse shoes, widow makers and more. I’ve bent alongside some of the best steel benders in the world in grip contests.

How to Improve at Bending

When it comes to building strength for bending, there is no doubt that the best option is BENDING. Buying the piles of nails, ordering the stock , wrapping the bolts, and bending the hell out them all on a regular basis. This is the number one way to get better because it is the only specific type of training for it.

CHECK OUT THE REST OF THIS KILLER POST AFTER THE JUMP (more…)