Many people have written me over the years about wrist pain when benching. After all, everyone loves a big bench press.

It’s one thing if you are stalled in the bench due to a technique issue or because you are having trouble deciding on a bench press program.

It’s something different altogether when your bench press is suffering because of pain in the wrist, so annoying and distracting.

So, what I have done is put together a video for you that is what I call a Diesel Work-around.

What is a Work-around, you might ask?

Well, in industrial settings, when a part of a process breaks or is faulty, but the work still needs to be done, alternative measures can be put into action in order to get the same finished product or desired result.

These alternative measures are called Work-arounds. For instance, if a conveyor belt is shut down, the items being moved can be placed into a cart and moved by hand to the next location, successfully “working around the problem” until it can be fixed.

In the case of the Bench Press, when there is pain in the wrist, we can perform a slight Work-around in order to still get the work done, in order to not miss a workout.

Now, before I get too deep into this, I have to stress this point: If you are injured, you need to address the injury with professional help.

So, if you strained your wrist in a bar fight or because you fell down a flight of stairs in a drunken stupor, you need to go to the doctor, get the problem professionally assessed and follow the doctor’s or therapist’s suggestions in order to completely address the injury.

However, wrist pain does not always mean that there is a break or soft tissue damage, such as that which can occur when you try to touch the stripper on stage and the Eric the Bouncer grabs you and tosses you out the back door into a dumpster.

Sometimes the root of the pain in the wrist is actually something simple such as the misalignment of the carpal bones in the wrist.

The bones of the hand and wrist are supposed to be arranged in a specific order. However, if we are training out of balance or if we have some light trauma to the wrist, these bones can be thrown out of whack, causing noticeable pain and loss of range of motion.

To see what I mean, check out the above picture. It may seem as though the bones seem to be randomly stacked on top of one another, but that is not the case – they are placed exactly how they need to be for optimal performance of the hands and lower arms, and if they get out of whack from trauma or imbalanced strength ratios as a result of your training, you can have some problems.

In cases such as these where the pain might just be a bone slightly misaligned, the following Diesel Work-arounds fit in nicely. They take pressure off of the wrist and allow you to perform work on the Bench without having to miss a bench workout.

Work-around #1 – Use a Thicker Bar

A thicker bar, such as an axle or fat pipe, can be used on the bench press instead of the normal Powerlifting bar. This will feel different to you, but you should notice that there is not quite as much pain when performing the pressing movement.

The force will be spread out over more of the hand and not so much directly on the point of pain within the wrist. If you do not have an axle or thick pipe that is set up for pressing movements, then you might also try a set of Fat Gripz placed on the bar to accomplish the same general objective.

Diesel Work-around #2 – Wrist Straps

Another suggestion to try is wrist straps. These can help cradle the wrist as you press can be very helpful for reducing pain.

A lot of people think I am completely against wrist wraps, but that isn’t really true. I think they are great for preventing injury and for helping to recover from injury, like if something is “out” in your wrist.

The most important thing to know here is exactly how to wrap the wrists in order to get the right support, which I show you in the video, below.

I hope this has been helpful for you. If so, please leave a comment below. I’d love to hear from you.

Thanks and all the best in your training!

Jedd

P.S. I just got interviewed by Andres Gonzalez of Strongermen.Blogspot.com. Andres seems like a very nice guy who has decided to improve his lifestyle and has been doing a lot to better his health and well-being. In addition to that, he has been interviewing people he has been following who have made strength training a part of their lives. He found my site and said it is something that has helped him out with his journey to become stronger and I really appreciate him seeking me out.

Also, last week, Andres put together this cool video of the Top Nail Benders in the World. Check it out:

• How to Bench Press Correctly
• Why You Should Train Your Grip
• Massive Thumb Pain
• Bird Calls, Burning Red Eyes and Insomnia
• How to Bench Press

If you spend a lot of time seated, or if you travel a lot in vehicles or in airplanes, then this post is for you.

Also, if you are an athlete and your sport requires you to be able to perform powerful movements with the lower body, like jumping and bounding, then this post is for you.

In addition if you run, whether in sprinting fashion or distance, then this post is for you.

And if you participate in strength sports or feats of strength, then this post is for you as well because today I am going to show you how you can get more power out of your glutes which will lead to better striding power when running, better leaping and jumping power, and better executtion of posterior chain strength movements such as deadlifts, cleans, throws, and braced bends.

Importance of the Glute Muscles to Sport, Strength and Power Movements

Your Glutes are some of the most powerful muscles in your body.

They are heavily involved in Power Movements like jumping and sprinting as well as directional changes.

Unfortunately, if you spend a lot of time sitting down, then you might be making your Glute strength disappear.

You see, when you are seated, your hips remain in a flexed position. Over time this joint angle at the hip can cause the hip flexors to shorten and tighten.

The image above from Human Kinetics shows the relationship between the front of the body and the rear. With tight hip flexors, generally comes weak lower abdominals and conversely, the muscles on the opposite side, the lower lumbar muscles and the glutes get weakened and can’t do what they are meant to do.

When the hip flexors shorten like this and become tight, they can actually hinder the amount of power your glutes can generate because they will keep your hips from extending correctly in the movements we mentioned earlier, such as jumping, running and other unilateral and power movements.

To illustrate this a bit better, imagine trying to jump up in the air, but attached to your waistline is a chain on either side, connecting you to the floor, and just as you are about to really get some drive going, the chains hit their maximum length and won’t allow you to explode. That is kind of what is going on when you have tight hip flexors.

Two of the main reasons to address this issue are stretching the hip flexors and activating the glutes.

Understanding the Hip Flexors

In the image above, you can see where the hip flexors are located, and where they attach. A lot of people don’t realize the actual articulations of the hip flexors.

Per Wikipedia:

Origins: The Psoas major originates along the lateral surfaces of the vertebral bodies of T12 and L1-L5 and their associated intervertebral discs. The Psoas minor, which presents in only some 40 percent of the population, originates at the transverse processes of L1-L5. The Iliacus originates in the Iliac fossa of the pelvis

Insertions: Psoas major unites with iliacus at the level of the inguinal ligament and crosses the hip joint to insert on the lesser trochanter. The Psoas minor inserts at the iliopectineal arch, the thickened band at the iliac fascia which separates the muscular lacuna from the vascular lacuna. femoral nerve, L1, L2

Common Hip Flexor Stretches

For individuals who have tight hip flexors, one of the ways to correct the situation is with stretching. Below is a commonly used stretch and some slight variations in order to intensify it.

Kneeling Hip Flexor Stretch

One common Hip Flexor stretch is the kneeling hip flexor stretch. Just getting into a position like what is shown above is not good enough, however. You must keep the torso upright and as you move forward, keep the pressure directed into the hip flexor muscles themselves. Improper angling here can result in stretching the quad. The quad originates on the ilium so its path is similar to the hip flexors. Not that there’s anything wrong with stretching the quad, but the purpose of this stretch is the hip flexor.

With Arm Raised

This stretch can also be intensified by raising the arm on the same side as the leg being stretched.

With Foot Elevated

As your flexibility increases, the rear foot can also be elevated to increase the stretch on the hip flexor and the quad as well.

Again, this is just one stretch that you can do for the hip flexors, along with a few modifications. In a bit I am going to show you another exercise to try that actually stretches my hip flexor even better while activating the glutes at the same time.

How to Activate the Glutes

When tightness on one side of the body inhibits a muscle on the opposite side of the body, we often have to retrain the muscle to fire properly. In the case of Glutes that have been shut down, the athlete has probably learned to use the hamstrings and muscles of the lower back to provide the force needed for hip extension. We have to get the body back in tune by training the Glutes to fire when they are supposed to.

Glute Bridge

Perhaps the most common of Glute activation exercises is the glute bridge. This movement can be done with one or two legs, and can be modified by extending a leg or by adding resistance, such as chains.

Quadruped Hip Extension

Quadruped refers to being on all fours. One leg is then lifted upwards by means of the Glutes. Very simple to perform, but attention must be put forth not to cheat or use momentum.

Fire Hydrant

Named after a dog lifting its leg to mark a fire hydrant, I learned this movement from Joe Defranco, and in particular, I learned that you don’t half-ass this movement (sorry for the pun, but I had to). The way I heard Joe describe this movement is to imagine you’re sneaking into a house through a very large window. Perform the exercise by carefully pulling the hip around the full range of motion, slowly and deliberately. Doing the exercise like this REALLY helps you feel it. Don’t just go through the motions.

How to Do Both at the Same Time

There is absolutely plenty of value in performing the above exercises. I have done all of them and they have worked for me in varying degrees.

However, recently, when shooting footage for a DVD on Braced Bending, I stumbled onto an exercise that actually is highly effective at stretching the hip flexors while getting an extremely intense contraction from the glutes. In fact, of all the Glute exercises I’ve ever tried, none of them can compare to the heightened contraction of this maneuver.

I call this move the Knee Driver, because I was using it to demonstrate the initial kink used when braced bending things like steel bars, wrenches and other odd objects. In the initial kink, you use the strength of your glute to drive your knee into the bar to get it to bend, thus the Knee Driver.

Knee Driver

For me, I have never felt a Glute Exercise that caused such a deep and hard contraction of my Glute Muscles. I mean, this exercise balled my glute up so tightly when I first tried it that I could not believe it, plus it stretched my hip flexors at the same time, and I have done it just about every workout since then in order to get my Glutes ready to go.

I like to perform this exercise for two sets with each leg and to do at least 6 to 8 good solid contractions per set. I don’t even bother with a lot of the other glutes exercises I used to do, because the contractions pale in comparison to what I get out of the Knee Driver.

I encourage you to give this a try and report back what you have found and how it compares to other exercises you have tried.

All the best in your training.

Jedd

Don’t miss important updates – sign up for the Diesel Crew Newsletter today.

• Fast Five to Lower Back Health
• Knee Stability Methods to Increase Strength and Performance
• Cossack Squats with 60lbs of Chains
• WARNING – Try at Your Own Risk
• Essential Hip Mobility – How to Warm-up Correctly

With all of this talk recently about Block Weight Training, such as Blobs, Fatman Blobs, Fatman Clones, and the Iron Grip Monster, it can be pretty easy to think that you either have to spend an exorbitant amount of money in order to develop Grip Strength through block weight training, or you have to completely ruin one of your perfectly good dumbbells by cutting one of the heads off.

However, this is just not true. In reality you can get a similar open hand training response by training with the regular dumbbells you already have. This opens up a completely new chapter of Block Weight Training that I like to call Inverted Dumbbell Training.

Inverted Dumbbell Training

Inverted Dumbbell Training is simply lifting a dumbbell by standing it up on one end and then gripping it by the end in the air. This type of Block Weight Training allows you to use the dumbbells you already have without any cutting or other time-swallowing tasks.

How to Perform an Inverted Dumbbell Lift

The video below will show you exactly how to perform an Inverted Dumbbell Lift:

Key Points About Inverted Dummbell Lifting

• Dumbbells come in many shapes and sizes, and the paint job will also vary. Paint condition can be a huge factor in lifting a dumbbell.
• An attempt should be made NOT to put the fingers or thumbs into the numbering or lettering of the dumbbell in order to maximize the challenge, however, using the print on the dumbbell as a training means is fine as long as it does not become a crutch.
• Be careful with very wide dumbbells. Wide open hand positions can injure the thumb’s soft tissues, which can be very hard to bounce back from. It is best to thoroughly warm up the thumb in order to keep it safe.
• Watch out for your toes. Any block weight, and especially an inverted dumbbell can come slipping out of your hand quickly. Don’t break a toe.

Biggest Inverted Dumbbell Lifts

Inverted Dumbbell Lifting is not really an event in Grip Sport by itself, however, they have shown up in a Medley here and there. To my knowledge, a 55-lb Dumbbell is the largest I have seen lifted in this manner. That is what I lifted in the video above, but I am not yet able to dominate it very time I try. I know I have also seen Andrew Durniat do this on a different dumbbell, and I think Brent Barbe got it as well.

Application into Your Training

Because of my goals of complete Block Weight Domination, I tend to try to go as heavy as possible 90% of the time when I do this lift. Using this movement in an athletic program or a general hand strength improvement program is not necessary though.

It can be just as effective at building beneficial grip strength by performing lifts with a lighter dumbbell and then adding weight, such as a chain wrapped around it or attached with a magnet, and then performing reps, or doing hand to hand transfers, hulas, or figure 8′s.

As awesome as Block Weights are, and as much as I love them, that does not mean the only way to get those benefits is with Single Dumbbell Heads. Inverted Dumbbells will get you these results very well, too.

Any questions, leave a comment below.

All the best in your training.

Jedd

Looking for other ways to train for thumb strength specifically? I love Grip4orce Handles and use them frequently in my training. Check them out through the banner below.

• Grip Strength Training – Block Weight Lifting
• Grip Training: The Fatman Clone Block Weight
• 39 Reps with the 50-lb Blob
• Continued Progress with the Double Inch Deadlift
• Build Explosiveness & a Strong Grip with the Dumbbell Snatch!

With this post, I want to list a few principles I follow in my training. Next week, I will cover some how to select the right movements and how to program them.

3 Keys to Building Muscle

These are the three main keys I follow in my training when it comes to exercise selection. Now, of course there are other things that go into it, but these are the main three things.

1. Multi-Joint Movements

If you want to put on muscle and develop strength, then you have got to get lots of muscle involved in order to do so. The best way to get lots of muscle involved is to select exercises that involve movement over more than one joint. Examples are Bench Press, Overhead Press, Squat, Deadlift, Bent Over Rows, Clean, Snatch, and other movements that are similar in movements to these.

Now, if you take a look at the exercises I listed, you will see that there is often movement taking place at two or more joints. For instance, with the Bench, there is movement at the shoulder and at the elbow, plus if you approach the movement like a Powerlifter does, you are using even more muscle across other joints as well.

Movements such as the Squat, Deadlift, Cleans, and many Olympic lift breakdown drills involve even more joints. With these we are working over the knee, hip, back and possibly the ankle, shoulder and elbow, meaning even more muscle is being involved.

In other words, select movements that are working larger portions of your body and keep isolation movements to a minimum.

2. Train for Power and Speed

I like to incorporate exercises of increased speed in my training. What I am referring to is explosive movements that produce an increased power output, such as Cleans, Jerks, Snatches, Stone Lifting, and other movements where virtually the entire body is working together in order to move large loads very quickly.

Another way I like to accomplish this is with Accommodating Resistance using exercise bands. I have bands of many different strength levels in order to be able to use this concept on different movements.

The Bench Press is a good example of how to employ bands in your training. Remember when using bands that the purpose is to move the bar quickly against the resistance in order to train the fast-twitch muscle fibers to fire quickly. These muscle fibers need to be stimulated like this, but most guys are missing this aspect. I say this, because when I ask people who email me about this they say they have either never heard of this type of training or haven’t bought into it. I am a firm believer in it and have been experimenting with how to incorporate it in different ways aside from just with barbells in my training and with my clients (these guys kick ass).

3. Work in Balance

One of the recent times someone wrote in, they wanted to know how to put muscle on their chest and shoulders and I asked them what they were currently doing. Their answer? Bench Pressing two days a week and Shoulder work on another day. Essentially three Upper Body Pushing days and each one was balls to the walls intensity.

One of the things I always tell people is that if you are trying to fill out your shirt, you’ve got to remember there are two sides of it to fill. You don’t want to be like Tom Cruise in the movie Knight and Day and look like your back muscles are non-existent.

There needs to be a balance between your pushing and pulling exercises in order to pack on muscle on the upper body, and do it safely. Remember, we are doing something that is supposed to be good for us, not something in order to set ourselves up for imbalances, poor posture and pain down the road.

What I suggest people do is for every movement where you are pushing something, try to also incorporate a movement where you are pulling. If you can pick out complementary or contra-specific movement patterns, that is a bonus as well. For instance, a complimentary movement pattern for the Bench Press would be Bent Over Rows or Seated Cable Rows (although, I’d suggest the Bent-Over variety in order to have a Ground Based Movement – another post for another day).

One other thing to think about with Balanced Training, keep in mind that if you are going all out for maxes on the Bench every time you do it and then you do Bent Over Rows with a fraction of the weight, that doesn’t count as balanced. The loading and effort need to be similar in order to realize benefits.

One good way to do this is to perform your Upper Body Push and Upper Body Pulling movements on the same day and match up the loading and effort that way. If you do it like this, it is easier to monitor than if you do it on different days.

Do You Have Muscle Imbalances, Currently?

If you have been following traditional programs and have not taken things such as antagonistic balance into account with your program, you could be headed for some issues. Unfortunately, imbalances can develop from more than just the way you program you workouts and your exercise selection.

Time seated in a car, time at your desk, time at home in chairs, and other considerations that affect posture can really do a number on you.

If you think you run the risk of having imbalances because you slouched in your seat in high school for years (like me), spend a lot of time at a desk at your work (like me), or have muscular imbalances due to an injury or something else, you should consider checking out Rick Kaselj’s Muscle Imbalances Revealed – Upper Body Edition.

I recently made Rick’s acquaintance on-line and began following some of his work and he has an impressive background. A few months ago he came out with a 2.0 Program for lower body and now he has updated his Upper Body Edition as well.

The sizable clientele he has worked with and the expert backing he has gotten is unbelievable. I strongly suggest you give his program a look if you are a candidate for imbalances. Here is my link: Muscle Imbalances Revealed by Rick Kaselj.

All the best in your training and look for Part II coming next week.

Jedd

Similar Posts:

• Push Pull Workout for Powerful Upper Body Strength
• Exercise Selection for Muscle Building
• Full Body Tension Training
• Shoulder Rehab – New Facepulls
• Essential Lower Body Training for All Athletes

Jedd: Please tell us a little about yourself – your athletic and training background and how you got involved with training athletes.

Chris: My name is Chris Miller, and I’ve been a certified Personal Trainer, and Strength/Conditioning coach for over 10 years in Columbia, Maryland. My company is called Maximum Fitness; which is located in Columbia, Maryland. My athletic background consists of playing Pop Warner football as a child, High school football, as well as college football. My training background consists of clients that are; little league football players, high school football players, basketball, lacrosse players, college football and soccer players, as well as MMA fighters, and boxers. I also do personal training and boot camps for the novice clientele to experienced clients.

I became involved with training athletes from the passion I had for sports growing up, and as an adult currently. I looked back on how I trained and viewed the workouts I used in order for me to prepare myself for football; and realized it was a totally different way of life training in the 1980’s. After I graduated from college, I started coaching little league football and high school football. I would see how uneducated these athletes were, and how wrong their workouts were in the weight room. This encouraged me to branch out, and develop ways in which I thought would be more effective in training these athletes. The fitness industry is ever changing; so I researched different training methods and products and created my own system in working with athletes; as well as used pieces of other systems I would see during my research.

Jedd: Many members of the Diesel Universe either compete in strongman training or do strongman training on a regular basis. Do you have any experience with Strongman Training?

Chris: Yes, I have trained with various strongman techniques; but have never competed. I’ve always wanted to compete, but never took the plunge to pursue it. Working at a landscaping company throughout college; me and a few other guys use to perform lifts of logs, trees, cement bags, and rocks all the time. We thought we were the famous guys that competed on ESPN. LOL…

Jedd: Have you included Strongman Training or Odd Object Training into your athletic training protocols?

Chris: Yes indeed! Strongman training is a great way to turn any athlete into a powerful force. I’ve used everything from Keg throws and lifts, heavy cement bags and tires, as well as tractor-trailer rims; before all the common day objects became available to purchase.

Jedd: Since incorporating Strongman Training into your routines, what benefits have you seen?

Chris: I’ve noticed an increase in power, strength, range of motion; as well as muscular endurance.

Jedd: Which athletes do you incorporate Strongman Training with? Football Players? Baseball? Etc.

Chris: I incorporate Strongman Training with all of my athletes; from high school age, college as well as my MMA/Boxing clients.

Jedd: What lifts do you find to have the best carry-over to athletic performance?

Chris: Tire flips, Sled pulls, Sled push, heavy med ball throws, sledgehammer slams on tires.

Jedd: How do you include Strongman Lifts into the routines? Primary movements? Explosive Movements?

Chris: With my offensive/defensive line clients, I like to use explosive movements, since the average play in football is 3-4 seconds; I like to work on explosive movements that simulate coming off the ball in a violent, but controlled manner. The MMA fighters I train explosive and some primary movements; due to the nature of simulating the actual combative movements during competition. I’d say I combine the two on occasion, but mostly using the explosive method for stimulating the fast twitch muscles which are used very much in these sports.

Jedd: How do you go about monitoring your athletes’ performance when using Strongman lifts? Do you ever “dial back” the intensity of the strongman lifts?

Chris: I monitor my athletes by measuring his/her threshold and tracking results through reps and time. Measuring how effective their body reacts pre- and post-lift is key for me. I try to “Dial back”, the intensity a few days before games or matches, because I don’t want to over work a particular muscle group; causing fatigue and muscle tear-down before they compete. I try to keep the intensity at 70-80% 2 days before games, and 60-70% a week before my MMA clients compete.

Jedd: What is the number one Strongman Lift you suggest other strength coaches put into their programs, out of all of the possible choices?

Chris: I’m glad you asked this question, because I personally say, don’t prescribe an exercise to a client, that you wouldn’t do yourself. I suggest all strength coaches incorporate the Deadlift into their programs. Every athlete needs a strong back and core in order to compete week in and week out. There are many variations of the Deadlift; therefore you can reap benefits from many variations, as long as safety and form is monitored.

Jedd: Have you had athletes push back on you when you introduced Strongman Training?

Chris: I train a college Division I Lacrosse player and Division III football player currently; and I’ve been training these kids since I coached them in high school. When I introduced the heavy chains and sled pulls 3 years ago; they looked at me and thought I was crazy. They refused at first, because their college strength coaches were stuck on the basic barbells and dumbbells exercises. After a few days of training, and 3 years later; they can’t get enough of the Strongman exercises.

Jedd: What is one piece of advice you would give to other Strength Coaches about instituting Strongman Training into their routines?

Chris: Great question! I first would advise the coaches to research the routines and experiment amongst the staff, then introduce the routine to their athletes. I would also remind them of the safety issues concerning these routines.

Jedd: Thanks so much for your interview. Please feel free to tell us where we can learn more about your training.

Chris: Thank you sir; it was a pleasure having the privilege to participate in this awesome interview! The Diesel Crew is doing big things, and I appreciate the education, and information that is being delivered daily by you all!

My company is called Maximum Fitness, and we are located in Columbia, Maryland. Website and contact information is below.

Maximum Fitness
Email: maxxfit@comcast.net

Chris thanks so much for the interview. DIESELS, Strongman Training is an excellent way to take your athletic training to the next level of Strength and Power. If you want to include this type of training in your programs in order to start reaping the benefits that Chris Miller is seeing with his athletes, pick up our Intro to Strongman DVD, so you can see how to perform the lifts properly and keep your athletes injury free while also becoming brutally strong!

All the best in your training,

Jedd

• Strongest Strength Coach at Juniata
  Demonstrating the Lifts for the Competition
• Grip Training for Track and Field Throwers
• Best Strength Training Exercises for Baseball
• Cool Video – Important Lessons
• Grip and Forearm Training for Baseball