The Strength of Steel and Bending Stock

Over the years, lots of people have asked me questions about the strength of steel and bending stock. Because steel bending can be so obsessive, and the need to constantly bend more stuff can overtake an individual so intensely, it can be easy to understand why so many people are hungry for this knowledge.

Common Questions about Bending Stock Strength

Here are some of the types of questions I get most often:

“How Strong is my Steel?”
People will be bending a certain nail, bolt or piece of stock and want to know if it is a good bend or not. This is understandable, because people like to know where they stand.

“What nail/bolt/stock should I go to next if I am bending THIS and want to bend THAT?”
Most people want to ultimately be able to bend a certain bar, whether it is the Red Nail or some other high level bend like the Bastard from Fat Bastard Barbell or the Battle Bar from Benders Battlefield. Along the road to this goal it’s nice to know which bends to attempt along the way.

“How far am I from the Red Nail if I am bending this or that…”
Sometimes people are seeing progress by cutting what they can bend down to shorter lengths, or they have been moving up to harder graded bolts or slightly thicker stock, but they still want to know how far away they are from their goal.

And there are many, many more questions I receive about the strength of bending stock.

Comparing Strengths of Various Pieces of Bending Stock

There is a system that is used to rate the strength level of bars. This has proven to be quite useful in getting an idea of where different bars lie in relationship to one another, and it even works well for a variety of different stock, including Round Steel, Graded Bolts, Drill Rod, and even square and hex steel.

This system was innovated by Eric Milfeld and later Mike Krahling. These are just the guys that I am most aware of in the United States who are doing it. There may indeed be many more who are doing this.

This process involves special attachments that are put onto the bending stock being rated, followed by using the steel to pull against weight until it bends to the desired angle. Once the stock bends to that angle, it is assigned its strength level.

This process is often labeled “calibration,” although there has also been debate about whether that is the proper term. Perhaps a better term to describe it would be simply “rating the stock.”

Regardless of what you call this process, it has proven to be a fairly reliable method for a solid comparison tool, as well as something to base your progressions and purchases upon.

In the video below, Mike Krahling demonstrates the process of rating the strength of a steel bar.

Now, what you see here is just one bar being rated, but over the years, many bars have been rated and also logged for comparison at the AZ Grip website. You can see the strength comparison chart here: Steel Bending Progressions.

Now, there are limits to this process, and that needs to be understood from the beginning.

For instance, steel varies and it can vary quite a bit. Just because you bought a Red Nail back in 2004 does not mean that a Red Nail that you buy right now will rate out at the exact same number. New stock might have been selected to be used at some point. (Of course, the Red Nail is still a Beast to bend, so no disrespect to IronMind.)

Variance of Steel Strength

As I point out in this post, Strength Variations of Steel, it is possible to see strength variance within the same piece of steel. Remember that steel is created in long lengths and then cut down in order to bend in shorter lengths. There can be quite a bit of variation within one of those virgin bars pulled out at the factory. So in that regard, you have to understand that just because you buy a 7-inch by 5/16-inch length of Cold Rolled Steel, it does not guarantee that you are ready to certify on the Red Nail, even though the Red Nail, too, is 7 X 5/16 CRS.

Variance in Steel Strength & Differences by Length

Also, you have to remember that you must take the readings of bars of different lengths very carefully. For instance, if you look at that chart, it lists the Red Nail, 7 X 5/16 in length and diameter, at 420-lbs in order to bend. Also, that chart lists a Linear “S” Grade 5 Bolt 6 X 1/4 in length and diameter at 425. An assumption that has often been made is that if one can bend that Linear “S” Grade 5 Bolt, then they surely must be able to bend the Red Nail, which is rated at 5-lbs lighter.

Unfortunately, this assumption is completely wrong, because the Grade 5 bolt is only 6 inches long, meaning there is less leverage available to produce a bend using the testing device. In reality, if the Grade 5 in question were 7-inches long, it would feel like bending a coat-hanger.

Comparing Different Bars

So, as you utilize the chart, make sure that you remember that comparisons should be made between different pieces of stock of the same length only. Also remember that the way the calibrating set-up bends the bar is not completely the same as the way the bar bends when you bend it, so just because a piece of stock rates higher than another piece of stock using the device, does not necessarily mean it will feel harder to bend when you try it.

Solid Resource

Even with this handful of limitations, the “Steel Progression Chart” is a very good resource for you in your bending training. It has been an extremely helpful tool for both new benders looking for ways to progress in their bending, as well as seasoned veterans who are looking for stepping stones to their ultimate bending goal.

In fact, I reference this chart quite often with my coaching clients who are looking for progressions in their steel bending programs. And now, it is a tool you can place in your toolbox to reference whenever you need it.

All the best in your bending,

Jedd

The Braced Bending DVD is now available world-wide: Destroy Everything in Your Path.

I have had lots of questions from people wanting to know exactly what braced bending is and what is covered in the Braced Bending DVD, so I wanted to answer some of those questions right now.

Here is some information about the practice of Braced Bending and our DVD.

Braced Bending Information

There is a lot that is involved in Braced Bending. Below is a list of common questions about Braced Bending. The list of questions and answers about Braced Bending below is really just scratching the surface. Our DVD goes into much more detail than this and covers much more information as it gets into the instructional portions and technique demonstration within the DVD.

What is Braced Bending

Braced Bending is the act of bending steel, tools, or other odd objects through the use of your hands and the rest of your body, except your feet (the feet are used for what is called Scrolling).

In this DVD, we show you the basics of Braced Bending, as well as many specific Braced Bending techniques. This DVD is packed with instruction, running nearly 2 hours of solid information, and no fluff or filler.

What Feats are Included in Braced Bending?

Braced Bending includes but is not limited to bending all of the following types of objects:

• Short Bars: These are steel bars that usually 14-inches or shorter.
• Mid-length Bars: These are steel bars that are usually 14 to 30-inches in length.
• Long Bars: These are bars that are 30-inches or longer.
• Wrenches: There are a LOT of different kinds of wrenches available to bend, combination wrenches, tappet wrenches, and adjustable wrenches, just to name a few.
• Hammers: Framing hammers are the most commonly bent style of hammer, and many types are bendable.
• Spikes: There are many types of spikes out on the market, especially if you include bolts into this category, along with nails. Their difficulty can vary quite a bit depending on the manufacturer and other variables.

What are the Basics of Braced Bending?

• Wraps: The ends of the bars, tools, and other objects that are bent can often be very rough and possible cut you, so they are often wrapped as a means of protecting the skin. These are generally made out of suede, cordura, or towels.
• Gloves: For some feats, such as Hammer bending, it can be almost impossible to wrap the object with wraps. In these cases it is more common to wear gloves in order to protect the hands.
• Pads: Since these feats require you to press the object against a part of your body, padding is often used. Beginners will often use additional padding until the areas of the body toughen up.
• Materials to Bend: As you can see there are many things you can bend, once you know how. Being able to bend a variety of objects of varying lengths and thicknesses will make you a more well-rounded bending machine.
• Knowledge / Technique: Obviously brute strength will only get you so far. Knowing the proper techniques for Braced Bending makes an incredible difference in your bending success. That is especially where our Braced Bending DVD comes in.

On top of covering all of the above information in complete detail, Mike and I also take you through the proper Warm-up Techniques, Strength Training Movements, and other measures you can take to be a great bender, while remaining injury free.

Mike and I also have a little something special planned for those who pick up the DVD before January 26th, so make sure to check this out right now: How to Do Braced Bending.

Make sure your order your copy of Braced Bending today in order to take advantage of the special bonus offer and start your bending journey on the right foot!

All the best in your training,

Jedd

When I was a kid, maybe 8 years old, I was caught in a tornado.

It was one of the scariest moments of my life and to this day I still have nightmares about it.

You see, my family and I were fishing in a pond in our small boat. It was something we did quite routinely in the summer-time.

I remember the fish were biting, the sun was out, and it was an awesome day.

But then, all of a sudden, it was like the fish just shut down. The sun moved behind the clouds, and the breeze quit blowing.

It was really quiet, a strange and eery quiet – more like an absence of sound, where your ears start pumping as if they are desperately searching for something to hear…

Then, CRACK! There was an immense thunder-clap followed by a crack of thunder and instantly the rain started coming down.

My dad rushed us back to shore and we sprinted to our truck where we waited the storm out. I still remember the tornado shaking the truck.

Even as scary as the storm was, the thing that I remember most is that strange calmness that came about – the Calm Before the Storm, so they call it.

Well, right now is the Calm Before the Storm, because very soon the Tornado of craziness that is the Braced Bending DVD will come out.

I’ve worked very hard on this DVD to make it a winner for you.

I’ve edited and re-edited the video. I’ve added voice-overs, and put in slow-motion replays so that you can get the absolute best look at these amazing feats being done, so that you too can perform them.

Yes, this is the Calm Before the Storm, and just as that Tornado tore through the countryside shaking cars, ripping down branches, and knocking over old barns leaving a path of destruction behind it, when you get this DVD, you will be able to cut your own swath of damage as well.

After all, this DVD is called Braced Bending: How to Destroy EVERYTHING in Your Path.

As I put the final touches on everything that needs to be done, it is the Calm Before the Storm.

And the Tornado is this DVD.

More to come later. Keep your eyes open for more storm warnings from me, because this a storm you HAVE to see.

Jedd

P.S. No DVD anywhere will show you the detail that Mike and I do. There is nothing that compares to it. Believe me – I’ve seen them all.

(Coming Soon)

When it comes to Feats of Strength, people know where to go in order to get the proper technical instruction they need.

They come to me.

They know I most likely either have an ebook or DVD showing them the exact techniques for the feat of strength they want to accomplish, OR I have explained it at The Grip Authority.

Common Questions about Performing Feats of Strength

One of the topics you been asking about lately is “how do I get started with feats of strength?”

You want to know what wraps to get for bending. This is very important because there are many options out there and some are better than others.

You want to know what kind of protection to use on their body, especially when doing things like braced bending or horseshoe bending which requires you to press the object against your body.

You want to know what kind of steel to buy. This one REALLY varies, depending on what kind of feats you want to do – Braced? Unbraced? Log bars? Mid bars? Short bars? When you get into shapes, then it just gets even more confusing.

How to Get Started – The Essential Basics

To continue with this tradition of being the go-to guy for learning feats of strength, I asked my good friend, Mike Rinderle, to put together something that will cover EXACTLY these principal topics:

• What Kind of Wraps to Buy
• Where to Go to Buy Your Wraps
• What Steel to Buy for Bending
• What Kind of Steel to Avoid for Bending (Safety-Wise)
• What Kind of Odd Objects the Pro’s Bend

If you are into Feats of Strength and you want to learn the basics from one of the best all around benders in the world, then you need to check out the video that Rindo put together.

Braced bending Basics

Why This Video is Awesome

The best thing about this video is that it is no fluff. I do a quick Intro, Mike covers everything in about 8 PowerPoint slides, and then I close it to give you an important message, and that’s it.

Once it is queued up, it will take you like 5 minutes to watch it and take notes, then it is just up to you to get the stuff.

Plus it costs you nothing – $0.

All the best in your Feat of Strength training,

Jedd

The video below shows the first time I ever lifted the Blob by the Face.

The Blob Face Lift Grip Position

Lifting the Blob by the Face, or a Face Lift, involves turning the Blob over so that you must spread the fingers out and hook over the edge in order to lift it (as shown above).

This feat, for me, was something that I had to work long and hard on. Aside from specifically training on the Blob, in order to train my hand to be strong out in that position, I also taped a 25-lb plate to the bottom of an old rusty brake rotor. Once that got too easy, I put duct tape around the gripping edge of the rotor in order to make it tougher.

Still, even with a consistent training approach, it took me a very long time to be able to do this feat, so when it came up, I was pretty excited.

If this is the first time you’ve seen this crazy PR video, let me explain what is going on.

I am a HUGE wrestling fan and love watching old wrestling from the 70′s, 80′s and early 90′s. I have a sizeable collection of Classic Wrestling Videos, and I am always trying to expand it.

One of my favorites from this era was the Ultimate Warrior, and he was FAMOUS for cutting insane promos.

Here is an example of some of his promos. As you watch, check out the 0:44 to 1:04 section, as this will be fairly similar to what I say in my video clip.

I was watching a LOT of Ultimate Warrior stuff during the time this video was shot, which I’d estimate to be January 2005, because my hair is short and I am wearing the beard that Triple H eventually stole from me.

Obviously, I didn’t spout the promo as a word for word match to what the Ultimate Warrior said, but I don’t think Ultimate Warrior even used to get the right word-for-word himself.

As you can tell, I had tons of support from my buddy, Brad Martin, whom you can hear slaying the cheers. It’s hard NOT to perform well in that kind of an environment. Boy, do I miss those days…

I hope everyone had a Merry Christmas and have a Happy New Year, all!

All the best in your training,

Jedd